Go back to home

Prev Thread
Next Thread

Sw20 brakes

Author
Post
Essentials Only Full Version
Billr
MR2 Enthusiast
  • Total Posts : 9
  • Scores: 0
  • Reward points: 1588
  • Joined: 12/21/2015
  • Status: offline
Monday, November 27, 2017 11:10 AM (permalink)
0

Sw20 brakes

Exploring the possibility of fitting rotors and calipers from post 1991, which are bigger, to my 1990 turbo. Will they bolt straight on or do I have to change struts as well., any advice would be great, billr
#1


2 Replies Related Threads
    BriP
    MR2 Enthusiast
    • Total Posts : 7
    • Scores: 1
    • Reward points: 1183
    • Joined: 10/7/2015
    • Status: offline
    Re: Sw20 brakes Monday, November 27, 2017 5:26 PM (permalink)
    0
    straight bolt on mate, all you need are the bigger brake calipers, as well as the rotors and pads to suit.

    the backing dust shield just needs to be cut/bent to clear the bigger rotors, or you can remove the hubs to swap them out too. I just bent them back with pliers. no biggie.

    Good luck
    #2
    Reddtarga
    MR2 Deity
    • Total Posts : 2175
    • Scores: 249
    • Reward points: 5547
    • Joined: 4/7/2011
    • Location: Vic Australia
    • Status: offline
    Re: Sw20 brakes Monday, November 27, 2017 11:53 PM (permalink)
    0
    Although the early 7/8" master cylinder will work along with the early booster, for best results you would also need the later model 15/16" master and a later model more powerful booster. 
    Post 11/91 boosters are different to the early ones but the best one to get is the post 11/93 one. 
    Maybe read all of this:
     https://www.mr2australia.com/mr2play/tm.aspx?m=80895
     
     
     
     

    1990 ADM NA
     
     
     
     
     
     
    #3

    Home » [General Forum] » Messages to or from the administrators/moderators » Sw20 brakes
    Jump to:
    © 2025 APG vNext Trial Version 5.5