Hey Terry,
I'm urgently chasing an E51 passenger side driveshaft seal. Can you provide?
1 comment
we are working on a 2GR V6 conversion into a SW20.
A guy in the US has made some nice exhaust headers and engine mounting brackets. anyone interested in these parts so we can buy a few sets to get the freight price per kit down to something sensible????
check out this link if interested
http://www.twobrutal.co.uk/forum/showthread.php?16150-2GR-FE-3.5L-V6-Information
37 comments
need exhaust bracket....lhr and rhr are the same...4 12mm bolts hold it in place...if this helps...
i don't have a credit card...will bank transfer will be fine?
Leave a comment
do you have any standard steering wheels?
I want one that looks like this.
http://www.megaboost.co.uk/old/pics/mr2/mycar/shifter/DCP_2783.JPG
Thank you
I'm happy with the others parts I have received from you.
1 comment
currently available, 1 set of late model 22V type rear calipers, fully overhauled and painted in heat-proof paint. $375 pair. These suit the larger 94 onwards discs
New plain disc rotors to suit $160 pair
2 comments
Hey im in the market for a N/A gearbox i have shafts. Dont need anything special either, just a working box. In no rush either so let me know
Also after an engine manual for a 3SGE, Cheers
WoB
7 comments
hey road n track, how much roughly do u charge to bleed the cooling system? i have a 1990 gen2 turbo n recently replaced the thermostat, rad cap, temp sensor, cleaned the radiator, new water pump, checked headgasket and did a pressure test. As of right now the temp gauge sometimes rises to bout 3/4 then after afew seconds drops back down to half. i was told that is a classic symptom of air in the system. Also just found out that my heater is bypassed so how much roughly to get that working again? thanks
1 comment
hi guys just wondering how much im up for for some linkeages for swaybar to strut, i have cusco colovers, do you know how long they have to be? also im using N/A smaller swaybar at moment.
1 comment