Go back to home

Community Stats
1 day 7 days 30 days Max. View More
Top Posters
  1. AnaMaria
    (3 Recent Posts)
  2. grayman
    (2 Recent Posts)
  3. Sivocci
    (1 Recent Post)
Most Active Threads
  1. Which MR2 to buy?
    (3 Replies)
Top Rated Posts
    There is no record available at this moment
Birthdays
12/6/2025
Initial_G (33)
my mr2 pollock (60)
ctung2 (36)
Current active users
There are 1 member and 193 guests.
Admin
Administrator Moderator
2010/05/13 21:42:32
Whore of Babylon

Gearbox, SW20

Hey im in the market for a N/A gearbox i have shafts. Dont need anything special either, just a working box. In no rush either so let me know

Also after an engine manual for a 3SGE,

Cheers
WoB
7 comments Leave a comment
Road and Track
if you are still looking I should be able to help, but is it worth freight to tas??.
2010/05/21 09:04:00
Whore of Babylon
Well it might be, my shopping list is:

N/A Gearbox
1990 3SGE (full) Gasket kit
Waterpump
oilpump
timing belt
also, on a >200,000km engine i was going to do the rings but do you recon its worth doing the pistons, rings and conrods?

cheers
2010/05/26 09:25:10
Road and Track
at 200K, there may be considerable piston to bore clearance. typically #3 cylinder is out-of-round. if you just want a patch up, a re-ring might work, but dont expect it to last another 200k

i am reluctant to sell as-is gearboxes as OK today, crappy tomorrow. you can never please people.

I will do you a job lot deal on a box thats been stripped & fitted with new 2nd & 3rd syncros & all new seals , plus new engine gasket kit, water pump, timing belt, oil pump gear kit, all for $1700
2010/05/30 19:18:17
Senol
im looking for a s54 gearbox too.. If I can get a cusco type RS (i found a company that can supply them) would you be able to fit it? I honestly couldnt be bothered pulling my current gearbox apart seing that they arent worth much anyway. I also need another mechanical speedo the one that plugs into the box.
2010/07/31 00:30:07
Road and Track
no trouble to fit a LSD, but it requires a complete strip down and 2 new diff side bearings (as a minimum)
2010/07/31 19:29:30
Senol
How much would it be for fitting differential? I can just exchange my gearbox too (to reduce the cost) if you have one there thats lying around in good condition. as for the sidegears i think they are about $50 each new from toyota.
2010/01/08 12:14:08
Road and Track
best to phone me to discuss
2010/01/08 19:23:38

Comments are closed.

© 2025 APG vNext Trial Version 5.5