This is now an update of our May posting. we have sold all the boxes we had then, and now have a new lot coming on stream

I have stocked up on parts and can repair yours or offer an exchange for your convenience. I wont provide a fixed exchange price till I have your box apart and see how stuffed it is. You can expect a basic refresh of a "good" single syncro box to START at $1100 and the double syncro types START around $1550. Serious overhauls needing gears or hubs replaced, can cost double these prices. Freight to/from southern capitals is around $150 for the 2-way trip.

This is what we can currently offer, but it's changing daily.

90 SW20 MR2 turbo box. no LSD. rebuilt with syncros, bearings,seals etc as required.

97 V6 camry box with only 23,000km. I can modify this so it will drop straight into a SW20 3SGTE turbo, or perfect for a V6 conversion. Rare double syncro model with latest spec gears. I can change the diff ratio to almost anything you want.

96 SW20 MR2 Bathurst non-turbo box with factory LSD. Double syncro model. currently being rebuilt with syncros, bearings,seals etc as required.

96 SW20 MR2 non-turbo box. Double syncro model. currently being rebuilt with syncros, bearings,seals etc as required.

92 SW20 MR2 non-turbo box. Currently being rebuilt with syncros, bearings,seals etc as required.


Road & Track

For more information and contact details for Road & Track, click HERE

currently available:
5 puck, sprung centre heavy duty clutch for 3SG (non turbo). This is very streetable. Has just been overhauled with new pucks etc. drop-in to any SW20 with 3SG. $310

5 puck, sprung centre heavy duty clutch for 3SGTE (turbo). This is tough but streetable. Has been sitting around for a while so a bit shop soiled. Includes machined & lightened flywheel. Drop-in to any SW20 with 3SGTE or ST185/205 GT4. $480

Terry are the gen2 and gen3 flywheels interchangable?

TRD Shocks can you get? Mine a making a SSWWHHHIIII!! when i go over a bump, time for new ones. I was hoping i could just get the shock insert bits. im not sure on there real name.

But this is what i want:


Edit: Not totaly against any other good brand name shocks as long as they fit my current set up:

http://i171.photobucket.com/albums/u293/muhamidakbar/MR2/Photo-0025.jpg
http://i171.photobucket.com/albums/u293/muhamidakbar/MR2/Photo-0026.jpg
http://i171.photobucket.com/albums/u293/muhamidakbar/MR2/Photo-0027.jpg
http://i171.photobucket.com/albums/u293/muhamidakbar/MR2/Photo-0028.jpg
http://i171.photobucket.com/albums/u293/muhamidakbar/MR2/Photo-0029.jpg
http://i171.photobucket.com/albums/u293/muhamidakbar/MR2/Photo-0030.jpg

Hi Terry,

Can you obtain a close ratio gear set from a Carlos Sainz GT4? If not do you have something similar

It's for a gen3 box

Regards,
Rory

Hi guys, i live in the Brisbane CBD area and was wondering the cost of a new clutch for the MR2 i just bought. WHen it comes on boost the clutch slips then grabs again, amount of slip depends on cars speed and rpm.

Also wondering if you guys are able to tune microtech?

Thanks, Nathan

I'm chasing a single wire o2 sensor for my 90 sw20 turbo, Can you guys supply me one???

Hey mate,
chasin CT20b urgent!!

Price and availabilty please!

Thanks matt