We now have very limited supply of US made, ACL branded ,3SGTE forged pistons. $750/set including rings. Sizes are Std, 0.5mm, 1,0mm.
If you are shopping for these, you will realise this is an excellent price in the current market, with the cheapest ebay sellers asking $850 incl ex USA freight for comparable product.

The reasons we often use these pistons are:
a readily available ring pack , identical to the factory sizes, so you are not locked in to one supplier, when it comes time for re-ring

lowest available compression, with a 12cc dish, so these easily suit engines with machined heads & metal HG's, without knocking up the compression ratio unacceptably.

crown is thick enough to enable further machining for getting perfect zero deck clearance, or super large valves

Gudgeon pins held in with double spirolocks. these are simply the best retaining system you can get.

if you want a set, suggest you phone us (07-32018866) or direct email (roadandtrack@bigpond.com) . thanks

we have these Toyota turbos current available. Both will fit any gen2, 3SGTE engine

Hi-flowed CT26. this has a steel exh wheel and supra sized intake wheel, just rebuilt with bushes, rings, seals, o rings etc $1150 exchange

Steel wheel GpA CT26. this has a stock sized intake wheel but the groupA steel exhaust wheel. just rebuilt with bushes, rings, seals, o rings etc $950 exchange

We have a couple of CT20's undergoing rebuild, so contact us if you are interested in these.

we have a very late model double syncro "E code" gearbox that was built up for a Celica GT2 project that the customer cancelled. This will fit up to a V6 or 3SG . the box was a low km import, that appears to have come out of a V6 carina. we stripped and checked it, and replaced 1 bearing and all the seals. All re-sealed and reassembled $1250

If someone was interested, we could fit a GT4 transfer case and make a 205 spec box, or even convert it to MR2 spec with selectors on other side. pls call us if interested in these options (extra cost).

we now stock a small selection of top quality K&N pleated cotton filters for performance toyotas. We can source the full Australian market range direct from the importer, plus they have a few of the real oddities.

K&N’s lifetime replacement air filters are designed to increase horsepower and acceleration while providing excellent air filtration for your Toyota . These K&N air filters are custom designed to fit into your existing factory air box. The drop-in design means adding performance is simple. To install these K&N air filters remove the stock disposable air filter and replace it with the new high performance K&N air filter, no cutting or fitting is required.These filters are washable and designed to last the life of the car if properly maintained.

SW20 MR2 , ST162, 165, 184, 185 , Camry V6, AE92, $115

MRS "spyder" $100

MR2 AW11 (cone type filter only, most 88-89 models) $82

*****NEW RELEASE ITEM*******
K & N Apollo Remote mount, enclosed pod filter with cold intake system. Basic kit is $ 210 , black, red or blue cases.

See http://au.toyotaownersclub.com/forums/index.php?showtopic=5095 for independant review on a Corolla

The K&N Apollo CIS (Cold Intake System) is a universal cold air intake system incorporating a washable/reusable K&N High-Flow Air Filter. The Apollo’s specially designed shape increases volumetric efficiency and provides the benefits of an open cone filter and standard air box in one unit. Heat build up is reduced which keeps the intake charge cool. Smooth internal features minimize air turbulence and maximize air flow.
The Apollo's outer shell is made of a durable lightweight material that helps keep incoming air cool as it enters the engine chamber. K&N's Apollo system includes a cold air hose with a specially designed radius end cap so cooler outside air can be directed into the engine.
We are currently designing fitting kits for all the above cars, as they are an ideal solution to replace exposed pods in hot engine bays.
These are the very latest offering and designed for engines up to around 250hp. The enclosed pod can be fitted directly to the throttle body or mounted remotely with suitable ducting. Ducting can then be run to a proper cold air intake region.

prices incl GST but not postage/freight.

Hi,

I was under the impression you sold engine mount bushings?

I only need the front one, would i be able to get one from you guys? and what variations are there?

Is it easier to just get from toyota? what difference does a firmer bush do?

And i also need new "big end steering rods," is that only available from toyota?

Thanks.

Hi there guys. Just after a right hand side indicator assembly with harness and plugs to suit a gen2 sw20. Need either the stock amber/white one or a pair of clears if you have them.
Refer to this page for what I'm after:
http://www.mr2australia.com/topic.asp?TOPIC_ID=15748

we can now offer a good range of Japanese Denso IRIDIUM spark plugs. These are superb quality, and are designed to last around 80-100,000km, with performance and economy improvements along the way.

The common plugs like those for 3SG, 3SGTE, 4AG, 2ZZ etc are currently $18ea, but some odd ones are a bit dearer.

As a comparison, Repco's retail price for NGK's is currently $ 24.99ea

if you want some 'colder" plugs for race or heavily boosted engines, or non-toyota applications, then contact us to confirm prices.

all quoted prices include GST
For April 09 only, set of 4 (for above listed engines), $80 posted

thanks

limited stocks of genuine Toyota disc brake pad sets, most models , front & rear including MR2 NA & turbo & MRS.

$88/set express post to any major city/town, or a bit less plain post (price depends on postcode)

multiple sets will attract postage discount