E153 LSD driveshafts?? Help!

I have a GEN 2 MR2 turbo, It came with a non-lsd E153.
 
I brought a GEN3 E153 LSD and it came with the passenger / left side cv shaft, 
 
I did research before I brought the box and I thought only the passenger side shaft was different, and the drivers side / right side cv shafts were the same for lsd and non-lsd.
 
I have the box installed and the passenger side shaft in but the drivers side shaft does not go in all the way, I didn't want to force it as the drivers side shaft doesn't have and circlip on the end, usually they just slide in, I have worked on many E153's but not a GEN 3 one, is it possible they run a different shaft??

Its the right side shaft thats different.  It wont fit.  I think the left side shaft may be slightly different but still fits. You'll need the part of the axle that has the intermediate bearing on it from LSD car.

My gearbox came with the short / passenger shaft, 
 
After doing some research it appears the GEN3 LSD uses a different shaft, so now I need to find one.

Have a look at the Monkey Wrench website