Go back to home

Pedal feel after Big brake upgrade

Page: < 123 Showing page 3 of 3 - Powered by APG vNext Trial
Author
Post
Essentials Only Full Version
Reddtarga
MR2 Deity
  • Total Posts : 2175
  • Scores: 249
  • Reward points: 5547
  • Joined: 2011/04/07 19:51:15
  • Location: Vic Australia
  • Status: offline
Re: 2015/03/23 14:30:21 (permalink)
0
Supremacy, what model SW20 have you got? ABS or Non-ABS?
 
I believe the outlet pipes are all on the LH side for RH drive ABS cars like ADM or JDM cars
Pic shows a '92 Supra ABS MC fitted to my'90 model ADM SW20 using a '97 model booster
 
Looks like the pipes might be on the RH side for non-ABS RHD cars - catalog pics seem to suggest that.
 
Non ABS MC pipes might be on the LH side for LHD cars(USDM)
Strange that according to the catalog the ABS USDM MC's are on the RH side.
Bloody confusing hey?? May explain all the different pics.
 
Someone else on here should know if all that is right.
 
 
 
 
 
post edited by Reddtarga - 2015/03/23 15:20:35

1990 ADM NA
 
 
 
 
 
 
#31
Eric
QLD Moderator
  • Total Posts : 1117
  • Scores: 280
  • Reward points: 4319
  • Joined: 2012/04/06 21:41:57
  • Status: offline
Re: 2015/03/23 14:34:26 (permalink)
0
Yes I popped a Avalon check valve in line in the engine bay
#32
Reddtarga
MR2 Deity
  • Total Posts : 2175
  • Scores: 249
  • Reward points: 5547
  • Joined: 2011/04/07 19:51:15
  • Location: Vic Australia
  • Status: offline
Re: 2015/03/23 14:40:50 (permalink)
0
Eric
Yes I popped a Avalon check valve in line in the engine bay

Great!
I have heard some people forget to fit one.
Dangerous, unpredictable brakes without it.

1990 ADM NA
 
 
 
 
 
 
#33

Supremacy
MR2 Enthusiast
  • Total Posts : 42
  • Scores: 1
  • Reward points: 4902
  • Joined: 2011/09/06 17:09:21
  • Location: Melbourne, Victoria
  • Status: offline
Re: 2015/03/23 15:28:14 (permalink)
0
Redtarga, i have a 93 sw20 jdm import. No ABS fitted.

I just don't want to go out and buy a cylinder which then won't fit up to my pipes.
#34
Supremacy
MR2 Enthusiast
  • Total Posts : 42
  • Scores: 1
  • Reward points: 4902
  • Joined: 2011/09/06 17:09:21
  • Location: Melbourne, Victoria
  • Status: offline
Re: 2015/04/02 14:06:00 (permalink)
0
Anyone? Found another which may suit. Image shows correct side for outlets. JB6007 from a 94 hilux/4runner
#35
TomsMR2
MR2 Scholar
  • Total Posts : 206
  • Scores: 16
  • Reward points: 5057
  • Joined: 2011/04/07 19:51:15
  • Location: Perth WA Australia
  • Status: offline
Re: 2015/04/02 22:48:13 (permalink)
0
Reddtarga
Eric
I'm Running the 1 inch master and late model booster with the BBK 

Mine goes from resonably soft to firm and very bitey. havent had a chance to bed them in fully but will report back next week on how its feeling




I hope you also fitted a check valve on your intake manifold if you replaced an early model booster, since later boosters have no check valve mounted on them like the early boosters.


I fitted the check valve from a V6 Camry on mine abe it works great
#36

Supremacy
MR2 Enthusiast
  • Total Posts : 42
  • Scores: 1
  • Reward points: 4902
  • Joined: 2011/09/06 17:09:21
  • Location: Melbourne, Victoria
  • Status: offline
Re: 2015/04/10 17:12:24 (permalink)
0
With the help of a local brake shop and another forum, JB1882 is the one I was after.
#37
Page: < 123 Showing page 3 of 3 - Powered by APG vNext Trial
Jump to:
© 2025 APG vNext Trial Version 5.5