Haltech E8 Plug 'n' Play & Laptop To Go With It

I used this Haltech E8 on my Gen2 3SGTE with great results. Took a fair bit of effort with an auto electrician to get it to this stage where it really is plug and play for any Gen2 or Gen3, made 291rwkw on my built motor. Gen3 will just need a couple of jumper modifications to make it work. Already set up for inlet air temperature sensor, 3 bar map sensor etc and also coil on plug ignition system including cam and crank sensor. Of course it can be run on standard ignition if required. I will also include all the instructions and details on the modifications by the auto electrician. The standard 3sgte map can be downloaded free from the Haltech website. Runs off a serial connection so a laptop is included as most modern laptops no longer have serial connection, so you can dial in to the Haltech and load maps etc rather than relying on a tuner. Looking for $600 or nearest offer including the laptop which is a Dell Inspiron. Only selling as Im returning my car to stock and then selling it.

Ohh
I shall see let you know next weekend :)

Selling the car?  What the $()! did you buy the pinion for then? :P

-Totenkopf-
Selling the car?  What the $()! did you buy the pinion for then? :P

Remember he has another sdub, a former tarmac rally car or something.

Price reduced to $650

Do Haltech do a map for the 3SGE?

You would need to ring Haltech about a map for the 3sge, I wouldnt think it would be a problem.
 
Yes this will eliminate the afm, relies on an intake air temp (IAT) sensor and a map sensor that you already have. This Haltech was used on my rev2 (gen2) so its pretty much ready to go provided you have an IAT somewhere between the IC and TB

Good luck with sale, I sold mine on eBay for I think about 550 just the ecu and "plug n play" that wasnt correctly wired like yours so yours is a steal, if you don't find anyone here it may be best to try eBay.