That's a good idea. Ill be calling the shop tomorrow so we will see what they say.
Also after researching sard FPR I believe mine is a fake. Seeing as it looks just like the 20-30 dollar ones on eBay with the gauge on it. Could the gauge be dodgy then and be reading incorrectly?

Quick q. What turbo and power are you making?

Here I just ran outside and took a photo of the FPR.

have a mate that was running 215rwkw with a ct20b in his race car..... so its doable....
 
anyways the reason for the higher fuel pressure with the large injectors is to reduce the injector open time and improve the fuel atomisation resulting ina  better burn and greater efficiency.... particularly in the low rev range. The problem with 800's is at standard pressure the fuel squirts in but doesn't always atomise properly resulting in less surface area and crappy burn... so you put more in to get surface area and run pig rich and use too much fuel...
 
from MEMORY mines running around 60 psi too (rising at 1:1) with with 800cc injectors and a haltec E11v2. Initially i didn't have any problems on startup, i do OCCASIONALLY these days where it starts one cylinder and takes a while to fire the others, or doresn't start first turn then starts the second time with a pop..... but i get the impression its injecting the fuel and not firing it as the second time i turn the key the pop sounds like its extra fuel coming through... could just be cause a couple of cylinders have fuel build up and dont burn it, or it could be the same issue where the cylinders aren't firing cause of clumped fuel.... the OTHER option for me is it MAY not be firing cause over a while of this happening its coated the spark plugs a bit... i should check... HOWEVER... once it starts it generally stays started.

Ok so I have sort of figured out a bit more to this.
So right now I'm sitting in a parking lot. And when I have it in neutral and turn the steering wheel not moving anywhere at all it shuts off.(I do have power steering If that helps) Did it twice and now my battery is dead.... Sooooo now I need to find someone to jump it lol

A registered haltech dealer. Nothing goes wrong with air con on or stereo on and one time I had issues when having my HIDs on. But I've tested that one flicking them on and off and it doesn't die. it only died once right after I started it after turning the lights on.

re 225kw on a ct20b.
 
i know a guy that had a fully rebuilt gen3 engine cams the works etc, with 20psi managed to get 200awkw.
 
yes in an mr2 you'd get a little more due to only 2wd, but not 25kw, and def nowhere near that with stock cams esp in a gen 2 on an old tired engine.

no way your making 225kw(300hp) at the wheels without some SERIOUS mods... 
 
my mate that did 215rwkw did it with an open exhaust, trunk mount intercooler and a ton of other "stuff" and the boost right up.... if he tell you it's making 225 then, seriously, take your car somewhere else....