engines available as of may 07

various engines available with various levels of rebuild. Please email us directly if you have a specific interest. Can sell most of them outright or exchange. None of them have ancillaries like starter, alternators or manifolds. Note, "short" means no head,

4AGZE. short motor , block honed & decked, good factory std pistons, crank ground, new rings bearings, seals, gaskets, oil pump , timing belt& roller. can fit a head if required, but I dont have any GZE cams.

4AG . long motor, 86KW version (early AW11). long motor, block honed & decked, crank ground, new rings, bearings, seals, gaskets, oil pump , timing belt& roller, head overhauled with valves & seats cut as required

4AG . long motor, 92KW version (later AW11). long motor, block honed & decked, crank ground, new rings, bearings, seals, gaskets, oil pump, timing belt& roller. head overhauled with valves & seats cut as required

4AG . long motor, 92KW version (later AW11). long motor, block honed & decked, crank ground, new rings, bearings, seals, gaskets, oil pump, timing belt& roller. head overhauled with valves & seats cut as required
4AG 20 valve long motor, modiferd cams, new rings, bearings, saals etc valves cut, reshimmed

4AG . long motor, 92KW version (later AW11). long motor, block bored & decked, crank ground, new pistons, rings, bearings, seals, gaskets, oil pump, timing belt& roller, head fully overhauled with valves & seats cut as required, new exhaust valve guides.

4AG big port cylinder head. Original Group A high compression head. valves & seats all recut, new seals

7AG20 valve. currently under construction. full race spec, nitrided crank, special roids, flowed black-top head and quad throttles etc etc


3SGE Gen 2,long motor SW20. block bored & decked, crank ground, new pistons, rings, bearings, seals, gaskets, timing belt& rollers, water pump. head fully overhauled with new guides, valves & seats cut as required.

3SGTE Gen 2,long motor SW20. block bored & decked, crank ground, new pistons, rings, bearings, oil pump, seals,timing belt& rollers, water pump, gaskets. head fully overhauled with new guides, valves & seats cut as required.

3SGTE Gen 3, short motor SW20. block bored & decked, crank ground, new pistons, rings, bearings, oil pump, seals, timing belt& rollers, water pump, gaskets.

short means no cylinder head. see note above

PM sent

thanks for enquiry, but you have not told me what engines you are interested in. I had 1 of each of those listed, except 3SGTE where I had 2. some look like they have sold.

Also i might ask, what's a rough price for installation (assuming it all goes to plan - remove old engine, swap any bits that need swapping, put new engine in?

Cheers!

Ok thanks for that, guess i'd better start counting my pennies!

PM's sent as requested.

all engines now committed. I'll delete this post after a month or so andf then do a new one in a few months once stocks build up. in the meantime, just ask if you want something.
Please be aware however, we mostly sell rebuilt or reconditioned engines. these are always much more expensive than used engines out of imports/wrecks etc. we have good contacts with local importers so we can supply used engines, but they have limited warranty.