Re: *please help* AW11 Dashboard removal
I found these on my old image shack account, they aren't all there unfortunately so i'll have to go through some of my old hdd's.
i have labelled pics from full dash right down to fully stripped.
But, yeah. Flip the speaker covers off with a small flat blade screw driver, run the screwdriver shaft over your finger so you don't put pressure on the dash. You'll see 2 screws holding the speaker in and right in the corner is a screw holding dash in place, same on both side. Also is the 10mm bolts holding the lower frame on both sides (once lower dash panels have been removed) and by memory behind where the glove box sits and behind where the cluster was is screws to be removed.
It has been a while. Will be pulling one in a few weeks for a mate, so that will be a good refresher.. haha
if it's not blown, it sucks