Go back to home

Wolf 3D Problem

Author
Post
Essentials Only Full Version
Timclarkee
MR2 Aficionado
  • Total Posts : 59
  • Scores: 10
  • Reward points: 1398
  • Joined: 2015/12/22 10:01:01
  • Location: Melbourne, victoria
  • Status: offline
2017/04/24 13:11:31 (permalink)
0

Wolf 3D Problem

Hey guys, recently plugged a wolf 3D ecu into my gen 3 3sgte, car previously runs on standard computer but now it only cranks and does not start with the wolf attached. Seems like there is no ignition or injection pulse, anyone have any ideas? Thanks
Also the wolf was previously running a gen 2 3sgte and I believe it still has that tune in it.
I just got an adaptor loom from EMS to attach it to my gen 3 harness
#1


4 Replies Related Threads
    Supremacy
    MR2 Enthusiast
    • Total Posts : 42
    • Scores: 1
    • Reward points: 4902
    • Joined: 2011/09/06 17:09:21
    • Location: Melbourne, Victoria
    • Status: offline
    Re: 2017/04/24 14:27:14 (permalink)
    0
    I would say that the configuration is incorrect for your gen3 if it ran on a gen 2. The looms have different pinouts between gen 2 and gen 3.
    #2
    Carmikey
    MR2 Deity
    • Total Posts : 1969
    • Scores: 260
    • Reward points: 6437
    • Joined: 2012/04/23 15:31:23
    • Location: Greenwith 5125, S.A. Australia
    • Status: offline
    Re: 2017/04/25 00:18:08 (permalink)
    0
    ^^spot on!

    Sent from my SM-J320ZN using Tapatalk

    #3

    Timclarkee
    MR2 Aficionado
    • Total Posts : 59
    • Scores: 10
    • Reward points: 1398
    • Joined: 2015/12/22 10:01:01
    • Location: Melbourne, victoria
    • Status: offline
    Re: 2017/04/25 15:54:49 (permalink)
    0
    Supremacy
    I would say that the configuration is incorrect for your gen3 if it ran on a gen 2. The looms have different pinouts between gen 2 and gen 3.


    Thanks for the response guys, so dyno tuning the car and putting the proper gen 3 map in it should resolve the problem?
    #4
    Supremacy
    MR2 Enthusiast
    • Total Posts : 42
    • Scores: 1
    • Reward points: 4902
    • Joined: 2011/09/06 17:09:21
    • Location: Melbourne, Victoria
    • Status: offline
    Re: 2017/04/25 16:25:12 (permalink)
    0
    Dyno tuning will be requured to ensure optimum performance. The main thing that would need to be checked is input and output configuration.

    That software should allow you to jump online to the ecu and test outputs and inputs.
    #5
    Jump to:
    © 2025 APG vNext Trial Version 5.5