PSCT Pin from Engine ECU
Hi Guys,
I'm in the process of fitting an aftermarket ECU to my MR2. I have pretty much completed the wiring and confirming I have all inputs/outputs correctly wired.
Is anyone familiar with how the factory engine ecu and power steering ecu communicate? From what I understand, the engine ecu tells the power steering when the engine is running and according to the manuals, when ignition is on, there should be 1.5V or less between ground and PSCT pin. When running, the voltage should be 4.5v or more. I'm guessing the output should be grounded until the engine is started.
With the factory ECU unplugged, the pump runs when ignition is switched on.
Any help appreciated.
Regards,
James