Brakes

To Bottom

Brakes (p.6)
Post New Thread
Regular
turbomr2

Rev 3 front caliper and rotor on the rear?

Has anyone tried or know if the original REV3 front brake set-up can work on the rear? It's actually not needed but was just curious as I now have these laying around after my front upgrade to 6 pot. NO ABS in use! Thanks..
4
2014/07/18 00:33:39
Randomity

94+ Brake upgrade pedal feel

Hey guys, About 8 months ago, I posted about having some issues with my brake upgrade. Calipers locking on and overheating and whatnot.Since then, I've discovered that it was due to a) my ABS playing up, which will be removed fairly soon, and b) my right-rear caliper being seized and needing a rebui..
8
2014/07/13 19:09:50
Domma_aw11

Aw11 brake fluid and pads

hey guys, ive been reading other threads and it seems most talk is about the sw, i have asked in the race section, had no response.. so please swing us some info?? im going to a track day soon, and would like your opinions on what fluid and pads to use for this day, im looking for somthing tha..
19
2014/07/08 09:57:15
spyderman

Mr2 spyder genuine security / locking remote

Just purchased and programmed a new genuine remote of eBay for $56 ( don't buy the $50 one as it doesn't come with programming instructions) ,as I didn't get one when I purchased my car second hand Locks and unlocks doors and arms and disarms security system Best $56 I ever spent lol It sho..

2014/06/28 11:32:01
Eric

avalon master and booster

Hi all Stripped out a avalon for the 1mz recently. Noticed that the master from the Avalon has a"1" on it aswell as a very large booster. I am upgrading to late model brakes soon and was wondering if anyone has run an Avalon master in their car..
1
2014/06/25 20:22:03
lucifer

What colour to paint my calipers.

Well here's the colour of my current calipers.https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-prn1/t1.0-9/10361449_484585648339361_1001653392685871032_n.jpgBeen that colour for about 8 years now and the paint isn't holding up well. So any ideas? Could go red to match the car. Yellow again, but do ..
10
2014/06/01 21:43:43
thomas108

Different Rotor Thickness

Its my first MR2 and I'm keeping it stock, I went to buy new rotors and pads from Repco the other day and they said there are two rotor thicknesses available for the 91 model based on the engine power output? Where will I find power output on the car, should I get the thicker or thinner rotors if it..
5
2014/05/17 10:15:53
adamaw11

aw11 slotted rotors

Hi all. I'm looking to get some new front rotors. Looks like RDA do a drilled/slotted rotor for the aw11. Anyone have recommendations as to where to get them. Can the RDA ones stand up to a bit of track abuse? I've heard they're a little cheap and end up with brake shudder, but don't know of how the..
7
2014/01/12 18:21:41
5SGTE

SST 09756-00010

I'm sure a few of your will be in this situation soon enough, if not already. Looking to rebuild my rear calipers soon and need SST 09756-00010 to remove the Adjusting Bolt from behind the piston. From my searching this is a difficult tool to locate. I will try Toyota tomorrow but was hoping someone..
8
2013/11/26 21:55:24
MIDN1T3

Which booster? Gen 3 brakes

Hey all, Currently in the process of changing my whole braking system over to Gen 3 Turbo non ABS system. I have (or am getting) 93+ rear calipers (22v), 93+ front calipers (36T30), 93+ non ABS 15/16 master cylinder with the proportioning valve. So all I need now is the brake booster...but which one..
4
2013/11/26 00:47:15

<< ..4 5 6 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account