Brakes

To Bottom

Brakes (p.3)
Post New Thread
Regular
chausta

Big brakes keep locking up

Ok so my front brakes keep locking up too easily and its dangerous as hell. I have the tcs wilwood bbk on the front with supra rotors and deltav rear rx8 rotor brake upgrade with the gen3 calipers. I haven't driven the car much in the last year but I don't remember my front brakes locking..
6
2017/07/03 13:49:02
Dr.J

Gen III SW20 Rear Brakes

Hi all,I'm trying to buy some new rear discs for my Gen III SW20 turbo.Has anyone got a part number, or if the rear disc diameter is 280mm?I'm getting conflicting information. Thanks and much love!..
2
2017/03/19 01:12:54
Davedave

AW11 OEM replacement disks

So my OEM front discs have worn out. After some thought, I want high quality plain discs to replace them with minimum fuss. All the disks I can find are the same crap I have on my van, and it wears through them in 2 years. So, where to get high quality drop in discs? Still quite a few good pad ..

2017/02/25 09:34:25
Danti

My SW20 Mr2 new Photos photos from 2017 MTC Wakefield Park

I have never introduced my self here. My name is Danti been here from the day i got my mr2 last year September. i have learned a lot about my mr2 from here and i like that. So for the last week i have been searching and buying parts to make my brakes better. Especially after I fitted new BC Coilov..
32
2017/02/05 16:34:26
Phiz

1990 SW20 NA Brakes

Hi, what sw20 brakes are compatible with each other? For example are front discs/pads 1990 N/A compatible with 1996 Turbo? Cheers. Just need to figure out some stuff and not looking to spend too much on a calliper upgrade...
12
2016/11/25 13:22:37
terrytercel

Brake Booster & Master Cylinder working unit NEEDED. MR2 mk1 '85-'88

Morning all,I am after a working (or to be refurbished)Complete Brake Booster with Master Cylinder MR2 mk1 '85-'88.I am running out of time to have current on R&R.Have to source one by Monday 21st Nov. All and any leads GREATLY appreciatedjEN..
3
2016/11/20 11:45:46
3sgeTurbo

Help! Gen 3 Turbo Brakes w/ 1" MC & N/A prop valve locking up front brakes

Hi guys, I have an issue where my front brakes lock far too easily, especially in the wet. The car:1990 JDM SW20 N/A Manual (non-abs) with Gen 4 3SGTE1993+ Gen 3 Turbo brakesThin N/A Brake Booster1990 N/A proportioning Valve4 Runner 1" Master CylinderTyres are Federal 595's I am thinking that it mig..
5
2016/11/04 18:48:34
Steve_A

Can I setup Front BBK with Standard Rears?

I have a set of Grex/Alcon brakes & rotors for the front which I decided to grab at a good price. The plan is to run them with the Wolfkatz rear BBk, however the money I had ready to order them is now going to be spent on an ECU and tune so they will have to wait. I'm going to be very keen to pu..
14
2016/09/22 09:50:24
5SGTE

Caliper slide pins

Hey guys, What do you all use to lubricate your brake caliper slide pins? I rebuilt a set of calipers about 18 months ago and used some Bendix Ceramic Synthetic Lube,I didn't put these into service right away and have just inspected them prior to install. This stuff seems to have started becoming mo..
10
2016/05/03 19:39:10
Phiz

DeltaV

Does this still run? Asked them a few questions about the 32gtst calipers onto a sw20 as I have a pair here but no response. Asked nearly a week ago :(...
1
2016/04/06 21:57:29

1 2 3 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account