Manual gearbox into a ST246

theres a guy on toymods that has done a manual conv in a caldina..
 
think you need all the manual bits from the earlier model

Since there were never any manual ST246's (even the non turbo models), such a conversion would require a lot of attention to get right.

There's no lower spec MT shifter/console from that shape/interior, so would need to be a custom.

i dont think there is anything more to say on this.

mr2qik: yes! drive much better! now i can start from 7000rpm =) 
i forgot to say, right drive shaft with cv joints from celica st205.
currently done: AP-Racing front brakes with 330mm rotor, custom exhaust 3" with blitz nurspec, frontal intercooler (universal, made in china) 550x230x65,  in/out 2.5"
turbo hybrid celica st205 and garrett t3/t4 (t04e) (recently was broken, large oil leak!!!)
870cc injectors siemens deka, walbro 400l/h fuelpump, ECU january5.1 from LADA. it's a copy of ecu  bosch, made in russia. many cars in russia tuned up with this ecu, because it can be completely reprogrammed and adjust the ignition, fuel injection et.c.
pistons and rods are stock, but i plan to change it to forged cp or eagle. acceleration now is about 5s to 100km/h
video on youtube: (start from 2s)  (or, if this video will be moderated here, try to find "toyota caldina 0-100 + mt + tuned ecu january 5.1",
user "tizercin"

www.youtube.com/watch?v=t5QuT5Xh9gk&list=UUf1SMnl9-Qr7-lMpccGUFpw&index=3
 
and i have a car blog, but in russian. i think you can try a translate.google.com to read this
www.drive2.ru/cars/toyota/caldina/caldina_241/gcat/
if you have any questions - i'd like to answer!
с ya =)
 

How do the pedals look? Did you retain the foot handbrake/ebrake?

we are getting quite a few caldinas in to fix but no-one round here seems to want to spend any serious $ on them. great car really. much nicer to drive than Subaru and fells a lot less cumbersome than Stagea, which always feels front heavy with plow understeer.
 
of all the engines we have fixed, most problems relate to broken conrods after big boost increases and damaged/cracked turbo manifolds.

MR2QIK
How do the pedals look? Did you retain the foot handbrake/ebrake?

Sorry for the delay was on vacation traveling to Thailand ;)
i havent own photos of pedal look, but it looks the same! (like on upper photo with a big brake pedal)
 
 

i retain a foot parking brake, all OK =) and now i have a 4 pedals =)))))))
but somebody rework a foot parking brake to handbrake.
handbrake lever from st215 and handmade brackets, parking brake cables removes to the salon

 
 

the stock 215 rod is same as early 3SG non turbo. made lighter than old turbo rod and these fail
i use various types of forged piston and rod depending on customers need.
the usual Weisco and Ross forged pistons have low compression for earlier 3SGTE. The 215 uses higher compression piston
1JZ piston needs other modifications to clear the crank in 3SGTE
email me directly if you want to buy correct parts
Terry