Go back to home

2010/04/19 10:45:45
Findlay

Aftermarket Cams.

Hey guys, thought this would be the best place to enquire about some aftermarket cams for a 3sge.
I've read the article on modding the 3sge and done all the research etc.. however my question is, do you guys have (or know of) cams for a 2nd gen 3sge which will provide a power gain. I am aware of the limitations of the head on the 2nd gen however I thought I would ask anyway.

Cheers,

Will.
6 comments Leave a comment
Road and Track
we have suitable cams. what ECU and other mods??
2010/04/19 12:32:56
Findlay
stock ECU for the time being, that would be changed down the road.
pod intake, with exhaust system including headers.
is there any infomation avalible on the cams?

Will.
2010/04/19 16:04:58
Road and Track
the cams to suit the factory ECU are quite "mild" and you will get very little power benefit until you can reprogram the ECU

if you are prepared to change to a proper programmable ECU, then we can offer a much better cam profile

same goes with cam buckets. if you are prepared to change to gen 3 shim under buckets, or later shimless buckets, your choices improve dramatically

Terry

2010/04/19 17:16:10
surok
what if i had a gen 3 NA and i bought a wolf 3D ecu. what cams could I run?
2010/04/19 17:27:56
Road and Track
I have a wide selection of cams I have proven in various circumstances. The prices for the actual cams don't change much. I just need the exact application to selects the most approriate set-up
2010/04/20 07:05:47
Findlay
Thanks Terry for the reply and info, if and when i decide to go ahead with cams, i know where to look.

Cheers,

Will
2010/04/21 19:22:15

Comments are closed.

© 2025 APG vNext Trial Version 5.5