Go back to home

Monday, April 06, 2015 7:11 AM
mr2wreckersaustralia

Welcome to MR2 Wreckers Official SW20 Parts Request Thread

As fellow SW20 owners we realise how important it is to keep our cars on the road, looking good and performing to their optimum, over a number of years we have collected a good supply of SW20's to keep us all on the road for a number of years to come.
 
We like to keep as many MR2's on the road as possible, we have helped many owners get their MR2's running and pass RWC's we don't like the idea of losing any MR2's off the road so we keep all shells and these are available for sale we have Targa and Hard-top shells available along with sectional chassis cuts which are perfect if your MR2 chassis is beyond repair or for track cars,
 
We have everything ranging from Japan spec to Australian spec parts and aftermarket parts as well, you can post here, send us a PM (Private message), e-mail through our website or a call on 0423 186 211 and we'll get you sorted.
 
www.mr2wreckers.com.au
 
74 comments Leave a comment
RHOK
I need a left side trailing arm
 
 
 
I am looking for a aussie delivered instrument 260kph  cluster cable driven speedo
 
 
I am looking for the first half of the speedo cable that goes into the gearbox
 
 
I am looking for factory stereo mounting brackets
 
 
Looking for a factory single din pocket
 
Looking for a unmolested drivers side a pillar plastic to suit a targo top
 
Looking for a set of TRD lowered springs or eibach
 
Looking for the clip under the engine cover that the engine cover stick clips into when not being used
 
looking for the brackets to hold hand brake cables in place ?
 
 
Wednesday, April 08, 2015 6:50 AM
mr2wreckersaustralia
E-mail sent.
Wednesday, April 08, 2015 2:02 PM
TwoDogs
Hi  I am looking for the plastic cowelling that goes under the spare wheel in the frunk SW20 1991.
 
Part no. 5522617010
thanks
Tuesday, April 21, 2015 7:10 AM
Fast Eddie
WTB Dizzy 3S-GTE Gen 2
Tuesday, April 21, 2015 9:18 PM
mr2wreckersaustralia
PM's sent.
Thursday, April 23, 2015 1:55 PM
Mrskylighter
Hi, my mate is after a gen3 3sge ecu non immobiliser 4 plug. I think these came in Japanese vehicles where as the Aussie cars had the immobiliser.
I don't have the part number sorry. 
Friday, April 24, 2015 5:28 AM
mr2wreckersaustralia
PM sent.
Monday, April 27, 2015 5:52 PM
mymr2
Do you have a good sc12 supercharger for aw11. Must have good seals and bearing. Thanks. 
Tuesday, April 28, 2015 11:59 AM
mr2wreckersaustralia
Hi, Sorry but we are SW20 only.
Tuesday, April 28, 2015 12:49 AM
v_ken79
Would you have an OEM bottom front bumper lip also aftermarket ecu for 1991 3sgte sw20 or any adapter for standard manifold to fit the ihi rhc6 turbo
Cheers ken
Tuesday, April 28, 2015 1:13 PM
mr2wreckersaustralia
PM sent.
Tuesday, April 28, 2015 1:53 PM
Brandon
Any chance you have any eccentric T-Top rod guides. Part number 63283-17040.
 
I hate my leaky roof :(
Tuesday, May 12, 2015 4:03 PM
mr2wreckersaustralia
PM sent
Wednesday, May 13, 2015 12:07 AM
MrKrazyee
I'm looking for the part that hooks into the latch on the engine lid to lock it in for an sw20
Tuesday, June 16, 2015 9:15 AM
luke0500
im looking for a gearbox ?
Wednesday, June 17, 2015 4:49 AM
Carmikey
luke0500
im looking for a gearbox ?


More info? aw11, sw20 etc, na, forced induction?
Wednesday, June 17, 2015 5:31 AM
Shaz
Hi,
 
Don't suppose you would have a front hand brake cable for a 1990 SW20 N/A?
 
-------------------------------------------------------
Just sourced one from another forum member
Friday, June 26, 2015 4:35 AM
Shaz
Yes, mrmr2 just replied & has new rear cables as well. 
Friday, June 26, 2015 7:48 AM
MrKrazyee
I'm after a front bumper for an 1992 SW20 N/A preferably white
Monday, July 13, 2015 8:54 AM
stazzaman
im looking for a rear spoiler in white
Thursday, July 16, 2015 11:47 PM
mr2wreckersaustralia
PM's sent.
Sunday, August 16, 2015 5:28 PM
Red deuce
Chasing second hand uncracked ashtray black and climate control/CD surround in goood cond. Mine have heat warp on bottom corners, location WA 6164.
Cheers,
Jamie.
Sunday, August 16, 2015 5:49 PM
mr2wreckersaustralia
PM's sent
Friday, August 21, 2015 4:46 PM
Bazooka
Hi, looking for pair of complete SW20 seats. Let me know if you have anything.
Thanks
Thursday, August 27, 2015 1:17 PM
mr2wreckersaustralia
PM's sent.
Monday, August 31, 2015 6:16 PM
Knightrous
Looking for SW20 E153 passenger side gearbox mount and lower plate which bolts directly to the gearbox.
Tuesday, September 01, 2015 10:51 PM
Ondie18
Hi
 
I've emailed the site asking for a list of things but wondering also if you had a 93 3SGTE gearbox?
Saturday, September 05, 2015 7:47 AM
mr2wreckersaustralia
PM's sent.
Saturday, September 05, 2015 2:28 PM
Knightrous
Looking for a manual steering rack suit 1990 SW20.
Tuesday, November 10, 2015 0:48 PM
sweeetpete
Can Adub one be used?
 
Tuesday, November 10, 2015 2:04 AM
Knightrous
sweeetpete
Can Adub one be used?
 


Probably with some mucking around, but since this is for the daily, I just want a plug n play solution.
Tuesday, November 10, 2015 3:19 AM
mr2wreckersaustralia
PM's sent.
Thursday, November 12, 2015 12:23 AM
Lumix
Edit: Received your email, thanks mate.
Hello! I was told that you may have the 'CRW PTFE lined spherical shifter bushing kit' and 'OEM square replacement roller bearing.' Do you still have this item in stock? Cheers mate.
Tuesday, December 01, 2015 11:31 AM
Mat1800
Hi im after a
stock air box and intake (Turbo)
Afm sensor
Stock bov
Stock steering wheel
emissions setup (Turbo)
Thanks.
Wednesday, December 02, 2015 9:29 AM
rauty79
I am after a rear left speed sensor and an upper strut mount for the front right for my 93 SW20. Thanks
Tuesday, February 23, 2016 3:53 AM
Lucas
Called and messaged few times re: heater control unit and SW20 steering wheel.
Sunday, March 13, 2016 6:19 AM
mr2wreckersaustralia
PM's replied.
Wednesday, March 30, 2016 4:25 PM
Guest
My part arrived, thank you heaps. Very happy with price and delivery :)
Monday, April 11, 2016 11:56 AM
Dipit
Hi there,
Im looking for a plastic rear boot panel (where the reverse lights are housed into and the MR2 badge is) for a 1997 sw20.
Thanks
Tuesday, April 12, 2016 2:33 AM
5SGTE
Hi, I looking for some gen3 coolant lines (revised design) that run above the fuel tank. Also after a couple of the frunk prop rod clips. Thanks guys.
Friday, April 15, 2016 10:55 AM
Mrskylighter
Hi, can you please give me a price on an SW20 interior foglight switch? The two position JDM version with Japanese writing.
 
Cheers
Thursday, April 21, 2016 5:31 AM
mr2wreckersaustralia
PM's sent.
Sunday, May 15, 2016 1:10 PM
Ren31
Looking for an 3sg ecu for a bathurst mr2

Sent from my SM-G900I using Tapatalk

Monday, May 23, 2016 3:34 AM
mr2wreckersaustralia
PM's replied.
Friday, June 10, 2016 5:16 PM
Fast Eddie
Hi After Gen3 or 93+ Front, Rear Calipers, Rotors and Booster for my Gen2 GT
 
Wednesday, June 29, 2016 5:08 AM
Project01
Hi,
Do you have an E153 Transmission?
Thanks
Saturday, July 02, 2016 6:52 AM
mr2wreckersaustralia
PM's sent.
Sunday, July 10, 2016 3:26 PM
nemesis
Hi,
 
Looking for a electronic speedo sensor for 92 SW20 JDM turbo. Hopefully working correctly. Mine reads 60km/h when doing 100km/h
Tuesday, July 26, 2016 1:26 AM
southey
I'm after a stand alone ECU for my 1990 SW20 3SGTE.
Tuesday, July 26, 2016 8:28 AM
maccardo94
Its only petty. But do you have the plugs that go on the bottom of the inner shell of the doors that you screw the door cards into



Thanks

Friday, July 29, 2016 0:45 PM
93MRZ
Hi, i'm looking for parts for '93 3sge.  I am missing a part from the air box hose.    Also plastic frunk cover (under spare). Can you help?
Friday, July 29, 2016 11:06 PM
marin101
After 2 Seats preferably cloth trim
Sunday, July 31, 2016 1:01 AM
Sw2091
Do you have any kouki tail lights and centre garnish from 90 mr2

Sent from my SM-G920I using Tapatalk

Thursday, August 11, 2016 10:12 AM
71meh
Hey Gents,
 
email sent!
 
Cheers,
Tim
Thursday, August 11, 2016 7:31 PM
mr2wreckersaustralia
PM's sent.
Sunday, September 11, 2016 4:25 AM
Fast Eddie
Any chance you have a gen 3 rear subframe and mounts
Cheers
Monday, September 26, 2016 9:23 PM
mr2wreckersaustralia
PM'S Replied.
Sunday, October 09, 2016 3:24 PM
antmcbane
93+ OEM Springs?
Monday, October 10, 2016 8:53 AM
sir_smeghed
I'm chasing a factory steering wheel, gear knob (prefer the later style) and indicator stalk for a 1990 MR2.  A/C has been deleted so may also be after a complete A/C setup.
 
Thanks
Tuesday, April 11, 2017 8:59 AM
mistadeuces
Looking for quotes on:
- Floor mats
- Left Hand Side CV shaft (1990 N/A 3SGE non/abs)
- A/C compressor(or as close to new as possible or new)
- Alternator (as close to new as possible or new)
- Coilovers
- Aftermarket bucket seats?
 
Thank you
Wednesday, April 12, 2017 4:15 AM
mistar2
Model 1990 JDM SW20 G Ltd
 
Looking for Quote / Availability
 
Door speaker right side
Bevel cup for left door handle
L bracket & screw for tail light centre garnish
Frunk clips for both protective covers ( radiator and around spare tyre?)
Yellow clips for internal panels  (10)
Internal attachment screws for internal panels (instrument/Radio/Transmission Tunnel) (10)
Courtesy Light connection drivers side door jamb.
 
Will consider 2 x door speakers (right & left) from a later model SW20 if the connections and attachment holes are in the same position as previous models.
 
Thanking You
 
 
Wednesday, June 14, 2017 0:25 PM
5SGTE
I'm curious if you'd have a fuel pump hanger/sender to suit a 90/91 sdub? The fuel lines can be cut off to make postage easier.
Sunday, June 18, 2017 1:20 AM
sir_smeghed
I'm chasing a complete set of front and rear brake calipers and matching master cylinder from a 93 or newer turbo MR2, 94 or newer Bathurst edition MR2 or 95 or newer NA MR2.
 
Please respond ASAP as they are needed very soon.
Saturday, September 16, 2017 12:42 AM
mr2wreckersaustralia
PM's Sent.
Monday, September 18, 2017 5:43 AM
Kenmogg
Evening I'm looking for a complete rolling shell for an upcoming project.
Must haves
Manual pedals and gearshifter
Abs
Complete steering and suspension components, condition is not important as these will be repaired/replaced
Doors with glass
All windows windscreens etc.
Complete engine loom
Complete interior loom
Interior trims seats dash instruments etc not required.

Pm for further details if required
Sunday, December 31, 2017 11:00 AM
Steve_A
I'm after an alternator to suit an SW20 Turbo with the round connector!

Do you have one you could express post to the Gold Coast?
Wednesday, May 30, 2018 7:22 AM
Kook
Anyone know if Josh is still working?
 
I've texted him a couple of times and had no response
Thursday, August 16, 2018 6:39 AM
mr2wreckersaustralia
Hi, Yes we are, if you haven't already please email us directly at https://mr2wreckers.com.au/parts-enquiry/
and we will answer you as soon as possible. Currently custom orders can take some time but we will get back to you as soon as possible.
Thursday, August 16, 2018 6:49 AM
Knightrous
Email sent.
Thursday, August 16, 2018 7:03 AM
tuban
Hi, I've sent an email to mr2wreckers address with my phone number etc, can you please call me about an E153 gearbox, thanks
Thursday, August 23, 2018 3:42 AM
mr2wreckersaustralia
Messages replied.
Thursday, August 23, 2018 8:24 AM
Sw2091
I'm after the plug for the mirror position controller. Cheers

Sent from my SM-G955F using Tapatalk

Thursday, August 23, 2018 1:26 PM
RAY MR2
Hi Josh, I need a lower tie bar for a 1995 SW 20. Its the steel bar that goes under the radiator and is welded to the two frame rails. I don't know if you have one off a wreck already, you have so much stuff in those containers. It may have to be cut out of a shell or wreck.
Many thanks for your help. You will remember me from my visit to you two years ago. 
Wednesday, May 06, 2020 12:48 AM
Groper
Hi. I'm after a wiper cowl for a 1995 SW20. Hopefully you have one that doesn't have damaged securing points. Please advise. I'm located in Brisbane Qld.
cheers
Steve
Sunday, June 28, 2020 11:52 PM

Comments are closed.

© 2025 APG vNext Trial Version 5.5