3SG & 3SGTE engines

we have some 3S engine stuff to clear at special prices. all are outright sale

3SGTE Gen 3 ex St205 group A. Will fit late MR2 also. this is a bottom half only with reportedly 48,000km. we have checked the bearings and they look like new. $1200 with gaskets needed to fit your head etc.

3SGE Gen 3 head. std rebuild with shim-under bucket system and 94 spec NA cams. $650 . this will also fit onto any 3SGTE with gen 3 turbo manifolds, and you can then use end feed injectors, better rail. etc . Would be great on the 205 block mentioned above. we have used this arrangement on many of the competition GTE engines we have built, so we know it works well. These shim under buckets wil accept quite radical cams, but some other head work is often needed

3SGTE Gen 2 . This engine is in the process of being freshed up. forged pistons (used) with new rings, all new bearings, lightened/wedged/balanced crank, lightened and shotpeened rods with ARP bolts, all new seals/gaskets, new timing belt, new water pump, head overhauled with throat & port mods and 3SG (NA) cams for a bit more duration . $3750 as bare long engine. (currently not finally together, so we can happily add anything that you might want).

3SGTE gen 2 block, bored 0.5mm oversize for forged pistons and block deck faced square. Good for a home rebuilder. $330

3SG Gen 2 block. bored and suplied with new pistons & rings. block deck faced square. Good for a home rebuilder. $575