Clutch pedal gone very soft

Probably a leak in the clutch hydraulic system somewhere. Look at your clutch master cylinder, clutch slave cylinder and clutch lines for leaks.

Check fluids its looks low should i try refill.the LEFT one is for the brake fluid and RIGHT is for clutch fluid is that correct.which brand of clutch fluid should i get

Hi Richie,
I have been grappling with gear changing & clutch issues every now & then with my 1996 NA ever since I have owned it, (over 3 years).
One issue that I reckon caused soft pedal, & poor operating clutch was a deep scratch in Clutch Master Cylinder.
I have replaced mine.
Another that I am coming to grips with right now, is loss the the Clutch Slave Cylinder heat insulator.
In the hot weather, 3 or 4 successive days over 40 C back in Feb, my clutch was poor. Now that it is cooler it is o.k.
Other forums have said that once fluid has overheated it isn't the same any more. Will have to bleed again.
Amayama have just advised that they can't get me a new heat shield/insulator PN 31461-17010.
Will have to see if I can get a used one or work out how to fix what I have left.
**** job to work on Slave Cylinder, but.
To revert to your difficulty, you also need to consider that the Master & Slave Cylinders may be faulty.
 

Ok i top it up.no leaks from pedal or master cylinder.theres more pressure on pedal.take for drive change gears fine.got back check clutch fluid all gone again.i notice when pressing pedal squeeze noise coming from back bottom of engine? I think thats the problem there

Ok i check thank u