Go back to home

Turbo manifold for AW11 with 4agze

Author
Post
Essentials Only Full Version
drb
MR2 Enthusiast
  • Total Posts : 20
  • Scores: 0
  • Reward points: 124
  • Joined: 2014/11/03 18:28:09
  • Location: Campbelltown NSW
  • Status: offline
2015/02/25 19:31:52 (permalink)
0

Turbo manifold for AW11 with 4agze

Hi All
Can anyone help with information as to what manifold to use to fit a turbo to an AW11 with 4AGZE. 
The plan is to twin charge the car putting the turbo between the supercharger and the intercooler with a bypass valve into the air intake so as the turbo takes over it can draw air in from before the supercharger. 
 
Any information relating to what parts to use and where to get them is mainly what I am after.
 
Cheers
#1


1 Reply Related Threads
    feral4mr2
    MR2 Master
    • Total Posts : 211
    • Scores: 33
    • Reward points: 5549
    • Joined: 2011/04/07 19:51:15
    • Location: Glass house mountains
    • Status: offline
    Re: Turbo manifold for AW11 with 4agze 2015/02/25 23:11:31 (permalink)
    0
    hi,  for TC a basic log type manifold will do, you can buy them in DIY kit form off the net.  cheap ass ebay t3 flange special would also do the job, or get a custom one made. 
     
    as a ex TC builder/owner, the best proven way IMO is to have the turbo blow into the s/c, and the rest like it is stock.  air filter - AFM - turbo - s/c - i/c - TB. leave the ECU to control the s/c and don't bother with bypass valves.  
     
    good luck and have fun.

    if it's not blown, it sucks
    #2
    Jump to:
    © 2025 APG vNext Trial Version 5.5