Piston and rod combination help???

What are your intentions.  If you are never intending on lashing out on a large turbo and the supporting mods I'd probably opt for Mahle pistons.

We do rebuild packages for ~$1550 delivered to your door which include:
CP pistons
Eagle rods
ARP headstuds and mainstuds
Cometic HG
ACL Race bearing - rods, mains, thrust
 
Can also add in other stuff if you need e.g.:
Timing belt, Water pump, Oil pump, gasket/seal kits, cams, cam gears, valves, valve springs etc etc
 
If interested PM or use our contact us webpage (link in signature) and we can work something out.
 
Cheers
Dylan

Sounds like the same kit as mine.
A few pointer from my own experience, make sure you measure the crank journals before ordering parts to you don't have to reduce the size of the journals based on a set of bearings you bought. Balance the crank with the pulley and clutch/dynamic balance. This is worth the effort.
I guess you will also be looking at the head rebuild too? Put decent bronze guides (Supra ones work)and some decent valve seats plus shimless buckets. these are best sourced in the U.S. for a fraction of the price in Aust.
Also look at some decent valves (inconel and stainless)with a oversize. It can take time to do all this, but its worth the effort as it will handle a lot of abuse.
 
Good luck