we look like placing an order on Toyota Japan for some of the specially bent/shaped AW11 water hoses which are not stocked here by us, Toyota or any of the aftermarket hose suppliers.
These hoses will vary in price from $20 to $70 each.
If you want any , you need to give us month & year of your car.
If its a 4AGZE (Supercharged) then I also need the full frame and model details, both of which are found on 2 separate lines on the aluminium build plate under the front bonnet. Without them, I wont guarantee the hoses are correct

we now have our own Dyno Dynamics 2WD dyno.
Until recently we have ben "dry hiring" a machine where our staff did the work but someone else owned it. This end up causing us too much grief with continual changes to booking etc, and we apologise to our few recent customers who got caught up in this crap.
We have now bought an almost new dyno and it is located in a partners premises, just near us. Our staff operate the dyno and tune your car. We are familiar with Wolf, Haltec & Motec computers

I lost my head gasket last night on my pretty much stock Gen3. Is going to the Steel Shim going to have any benefits?

"Wheel Stud Long" how much longer are they than the standard ones?

Hey just wondering if you guys fo gearbox rebuilds? My clutch soon needs replacing and my syncros are on the way out too. Anyhow what im planning to do is take the gearbox out and get it rebuilt with new syncros/bearings/seals etc. and also fit a new heavy duty clutch(supplied by me) while the box is out.

My car is a 1990 sw20 gen2 3sgte - what kind of price range am i looking at with parts, labor etc.
Planning on gettinh the work done in the next couple of months, when i get my tax cheque back.

Cheers,
dan

road and track,

do you stock the OEM leads for a 1995 gen3 mr2 3sgte?

Please email me a price if you do

Hi, i am after a price and availability for the screw on adapter for my 3sge engine block and the adapter for the filter plus about 1 metre of braided hose and the necessary speedflow fittings so i can mount my filter up in the top right hand corner of the engine bay.

Thanks.

P.S. I don't want an oil cooler.

Just had a read of this article on the site and wanted to say that it was a well written worthwhile read.
It's good to read experiences and opinions from other people/workshops on this sort of thing.

Cheers.

I'm chasing a bored out fuel rail for my Gen2 3SGTE and i'm told you guys do them. I tried sending you an e-mail but they just come back saying failed. How much do the modified rails cost and do you have them in stock??

Cheers, Justin.