Suspension

To Bottom

Suspension (p.4)
Post New Thread
Regular
LindsayAW11

SW20 Bilstein front legs

Are the factory black bilstein struts rebuildable?..
8
2017/06/13 19:11:28
SW20TT

Need advice on SW20 suspension bushings

Hi guys, I badly need some advice on freshening up the suspension bushings in my SW20. On bumpy roads there is a loose and wriggly feeling in the suspension that is starting to bug me! I will be buying coilovers in due course but until then, I want to know which suspension bushings are vital to repl..
27
2017/05/29 13:31:29
HuggablePorcupine

Ultra Racing chassis braces

hey was wondering if any one on here has used ultra racing components on the sw20. was curious as to what the build quality is like and if they noticed any noticeable differences after the install thanks again :)..
8
2017/05/04 14:28:03
DamMR2T

Sourcing TRD lowering springs 48130-SW220 (PTR04-17900-10)

I am trying to source some TRD lowering spings to go with my koni yellow inserts, and was hoping someone might know where I might be able to get some. I know they are discontinued, so hoping that someone might know of some in stock somewhere. I've tried Andys Autosports, Lithia Toyota, Toyota New Ze..
18
2017/04/29 15:25:31
Steve_A

Adjustable camber plates compatible with KW V3's?

Has anyone fitted adjustable camber plates to KW V3's or know of any that will work? I've found a couple that say they are compatible with multiple coilovers but I'd hate to order some and have them not workout. Here's what I've found so far: Cusco - http://www.horsepowerfreaks.com/partdetails/Cusco..
5
2017/04/19 16:06:32
2lateforPplate

Mr2 aw11 1987: Rear roll bar diameter?

Hello,Im looking at the Prothane bush kit 18-2008-BL. Its a USA made kit and both the front and rear anti roll bar diameters are listed as Ø18mm (probably 3/4"). Has anyone used it and got an opinion of softness Vrs the local superpro equivalent? Is the Aussie delivered Mr2 rear bar this big? I thou..

2017/04/18 20:17:01
WHITCHY

Too lazy / cheap to install front sway bar reinforcement plates?

Thought this was worth sharing to hopefully save anyone who's not sure if they should put some sway bar re-inforcement plates on their Sdub. I never considered it a high priority as all I'd ever seen was pics of cracks around the mounts. This is what happened while I was driving around with my sus..
51
2017/03/20 15:01:20
2lateforPplate

AW11: Mrs rear rims with 205's. Clearance?

Howdy,Heres a request to anyone running an AW11, rear Mrs factory 6.5" rims and 205 tyres. What's your tyre side wall to wheel arch lip clearance? 0.5° of camber will alter the gap by around 4mm so please mention your camber no's if you know them. My rear wheel arches are now repaired after the prev..
3
2017/02/11 20:20:46
vicsticks

Rear Camber Bolts SW20

Hey all, Just wondering if anyone might have any recommendations/experiences for/with rear camber bolts for an SW20? Need to dial in some negative camber on the back so that my tyres don't risk fouling my guards. (low offset rims). Running BC BR Golds at the moment, but rears don't have camber tops...
7
2016/12/01 10:07:50
Kain

Wheel Alignment

I did a bit of a search, but couldn't find any discussion of wheel alignment settings that people use. Anyone up for sharing what alignment settings they use for the street, track, etc? Please also share what model car, and what suspension/wheel/arch mods you've done that may affect what you chose!..
1
2016/10/24 10:44:53

<< ..4 5 6 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account