Suspension

To Bottom

Suspension (p.11)
Post New Thread
Regular
micu

Where is the best place to get coilovers installed Victoria?

Hi Guys, I recently purchases a new set of bc coilovers for my sw20. Where in Melbourne do u recommend to get them installed? And how much approximately would it cost to get installed? Thank you..
3
2013/06/08 19:03:12
MRTurbo

Swaybar adjustable End Links

Found some great quality adjustable end links from Powergrid in the States. These links have a THK resin ball-stud (instead of rose-joint) and are fully sealed, but still allow up to 50 degrees of movement. http://i562.photobucket.com/albums/ss62/miljy008/20120626_120158Large.jpg Just thought I'd sh..
4
2013/06/07 18:34:44
bigh

1990 MR2 Turbo Front Swaybar Bushing replacement.

Hey All, I'm looking to replace the swaybar bushings on my 1990 MR2 turbo with the 18mm swaybars front and back. I don't really want to go with stock bushings as I have coilovers. I've looked at twosrus and found a bushing kit that also replaces the d clips that hold the bushing in. I read a negativ..
26
2013/04/10 20:28:55
Tree

Strut tops interchangeable?

Just wondering if the strut tops from early models and later models are interchangeable? It's probably not okay to use different years for left and right of the car, but say you're using early model for front strut tops and later model for rears?..
19
2013/04/07 16:40:13
MR PLOW

Coilover recommendation?

Hi guys, Looking for some suspension recommendations, the current suspension is tired and my mechanic has suggested either some new pedders to get me by for a while, or else do it properly and get some coilovers. I'm hoping to build to a "soft/medium-core" track machine, hopefully around 250 - 275..
38
2013/02/25 17:31:23
Tree

Advice for deciding between H&R springs or RS*R race springs with Koni's

Ok so after some weeks of research, then more research and when I thought I had come to a conclusion, did more research until I finally got to where I am now. I’ve settled for Koni yellows over BC Racing and HSD coilovers which I still think are decent coilovers. Now I’m in a dilemma choosing betwee..
18
2013/02/25 11:38:04
Monika

Front end suspension assembly diagram

Putting a call out to those that work at Toyota :-) Any chance of getting a diagram posted of the front end suspension assembly for 1994 MR2?? Just had both tie rods, rack ends and boots replaced, and want to know what else I should be replacing here after 19 years of service. Anyone's opin..
14
2013/02/24 23:50:33
Steve_A

KW V3's and wheel & tire clearance?

So I've got a set of KW V3's on their way and until now hadn't given a thought as to whether or not my current wheel and tire setup will have clearance issues. I know a couple of guys are running these coilovers, how has the clearance been for your wheel and tire setups? I'm running 18 X 7.5+35 with..
4
2013/02/21 00:29:44
GTMR2

Can anyone recommend a suspension specialist in the Parramatta / Blacktown area ???

I have searched all the threads on suspension ideas & brands etc etc etc............now I'm more confused. All I want to achieve is a 40mm odd lowering of the car without compromising to much on comfort, yes it's a looks thing Lol. Anyway, I don't do any track work, just mainly freeway driving s..
9
2013/02/19 11:18:37
Ddubtoille

Rebuilding coilovers

Hey yesterday I decided I wanted to lower my car a bit more so I started at it and got the drivers rear lower then started the passenger rear and it wouldn't budge we tried everything its seized up and the collars where just getting messed up from the c clips slipping out from them. Just wanting to ..
3
2013/02/19 00:32:05

<< ..10 11 12 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account