Suspension

To Bottom

Suspension
Post New Thread
Pinned
Admin

This forum will be turned off in the next 6 to 12 months

I will be turning off the server that runs this forum in the next 6 to 12 months. I run multiple discussion forums on it and since the introduction of Facebook Groups, usage of the forums has steadily decreased. The result of this is that revenue from Google ads no longer come close to covering the ..
5
2025/07/25 16:56:58
Regular
B24

Steering rack conversion

I am looking at improving the ratio on the SW20. As the AW/AE86 has a quick rack, I would like to know if anyone has successfully fitted this rack to a SW20. If anyone has attempted this, what was the restriction in the conversion...
14
2022/04/30 12:36:26
2lateforPplate

AW11 rear toe link options

My rear toe links have the ball joint inner end. They both have play and the OEM part is no longer available. Has anyone been successful in rebuilding their link by pressing in a new bush? Is there a similar joint that can be made to work from an aftermarket or other parts bin? Id love to hear from ..

2021/06/16 09:44:27
zoomzoom

AW11 Wheel Allignment Sheet

Does anyone have a aw11 standard wheel alignment sheet? I went to get an alignment and they did it to a sw20 spec.Interested to check if there are major differences...
1
2021/06/12 19:27:52
Benc

New Coilover Suggestions

All,I've read plenty of old posts about suspension, just wondering if pedders sportsryder extreme xa coilovers are any good now in 2021? I'm coming from struts and king springs. I don't track my sw20 gen2 turbo but enjoy some very spirited runs through rural Victoria.If those pedders are still no go..

2021/05/22 23:54:31
Sivocci

Intrax IK2 with ARC and Black Titan - for sale

Hi, In May 2017 I fitted a set of Intrax IK2 coilovers to my MR2 (March 1991 GT), at which point I had done 92417 km according to the receipt. I've now just replaced them with a rather more road biased set of MCA custom coilovers at a distance of 96023 km, so I have a set of Intrax going spare, curr..
1
2021/01/18 23:30:22
nut.161

Swaybar hitting body

Chasing a clunk when i hit a straight edge bump with both front wheels I found the swaybar has been contacting the body on both sides. The car has unknown yellow (king I assume) springs and is lower than stock. Is this a problem when lowering with the stock end links? or is there something else goin..
4
2020/12/02 21:41:24
nut.161

Bump Steer

After just registering the mr2 and a good amount of driving kms on it i have noticed an alarming amount of bump steer, mostly front but some rear. I have read through various threads across the internet but there doesn't seem to be much of a consensus on sorting the issue.My car is a 92 Aus model, w..
5
2020/06/26 15:48:25
Gr3nAd13R

SW20 Front Link differences

Hi All, I am wanting to change my Rev1 Front Links to Rev3 and just wanted to confirm that whats on the car is actually Rev1 and the fronts that I have are Rev3. This is whats on the car currently.https://lh3.googleusercontent.com/9UCG0X3ZRTnGWU-crtvIxIQ_xp_joJSn4qgGwUeZcIQHFtBSkHQRbO-aJ4SSMj-y2oEK4..
2
2020/05/15 20:44:25
JME

SW20 Suspension Rev1 Upgrade

The suspension on my 1990 N/A SW20 Rev 1 was very tired so I did some research and settled on BC Racing coilovers (https://bcracing.com.au/c-12-ra) and Prothane 18-2009 Red Total Kit ($153 from Amazon). In order to remove the factory struts you need to undo and separate the two sections of brake lin..
5
2020/04/30 08:57:38

1 2 3 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account