Engines / Exhausts / Gearboxes / Differentials

To Bottom

Engines / Exhausts / Gearboxes / Differentials (p.57)
Post New Thread
Regular
chase_d

Damaged Outter CV or Driveshaft?

So driving around last night heard a nice thump and a terrible rubbing sound and stopped the car to find this on the rear: http://i46.tinypic.com/x534nt.jpg The wheel is heap of positive camber and brake pad clip dug deep into the rotor Is this just the outter CV Joint or is it the whole shaft? Basi..
6
2012/07/22 07:24:10
greekbits

Is There Any one in Victoria , who can be recommended for a gearbox (re) conversion...

I currently have a double synchro Lsd gearbox that has been converted to suit a celica gt2 conversion project ive been tinkering with for a couple of years now, due to personal reasons, i wont be completing the gt2 project, instead i am hoping to have the selector mechanisms reconverted back to the ..

2012/07/18 20:51:17
adisco

Aghh...Running very very rich/bad. HELP PLS

Hi Guys, need some ideas please, im puzzled with my latest issue thats got worse and worse. Basically it started running rich from about 2000rpm to 3000rpm. The car would hold back and splatter and above those revs would pull as per normal. But the more i drove the car the worse it got.. Now, it id..
11
2012/07/16 23:14:01
yellow mr2

Need advise

Took the car out for a spin today with the roof off and music pumping driveing down the road as you do,i went to turn the corner and gave it a bit of gas and blew the the diff or the crown and the car was stuck i couldn't even move it more then 3-4 inches now just waiting for a tow truck the only pr..
20
2012/07/16 23:00:30
spudman

1998 Beams Motors

Hi all, been a while since l visited the forum. Decided to upgrade the motor in my 1993 MR2, looking at a beams from US, any thoughts of what the best option would be at this stage. Don't have a tone of money to spend thanks..
7
2012/07/12 20:42:11
subaeroux

arp head stud socket install and removal

Does anyone know what is the correct socket to use to remove and install ARP head studs (203-4204) for 3sgte gen 2?..
1
2012/07/12 20:28:45
ericvitasz

urgent help wanted

Need to find a mechanic who can help with a 2002 Toyota Sypder has SMT problem with gearbox. Live Gold Coast - or do you know anyone in Brisbane..
1
2012/07/12 20:26:42
yellow mr2

Any ideas on wat rims to get for my mr2?

Hey guys, just wondering if anyone had any ideas on what rims to get and also are 19's too big for the rear ?..
11
2012/07/11 15:47:03
micu

what is the most quiet aftermarket exhaust?

hi ive currently got a custom 3inch aftermarket exhaust and its been test with a dB of 110 does anyone know whats the most quiet or most quiet aftermarket exhaust? ive had too much hassle with police. cheers...
12
2012/07/11 12:04:25
adisco

Boost drop :/

Car: Mr2 turbo 1991 Problem: Ive got a problem with boost drop that i still havent figured out. Boost will get up to 17psi and will drop down to 12-14 psi at around 5000rpm onwards... With my old set up i ran the following mods: -2.5inch exhaust with knocked out cat -Aftermarket side mount cooler ..
11
2012/07/10 10:51:15

<< ..55 56 57 .. - Powered by APG vNext Trial

© 2026 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account