Engines / Exhausts / Gearboxes / Differentials

To Bottom

Engines / Exhausts / Gearboxes / Differentials (p.51)
Post New Thread
Regular
s2d4

Sprintex superchargers

Hi guys, I've been looking at a getting a spare SC12 and all the ones I've seen were all definitely on their way out. Has anybody ever looked into this? http://www.sprintex.com.au/sprintex/superchargers/ It looks like the S5-210 one would be perfect as the SC12 replacement and it would look OEM fro..
9
2013/01/25 03:39:15
beagle_senior

E153 Filler Plug Help

Hey Guys, I am in the process of filling the gearbox oil ready for the car to go to the dyno on Friday, and I had 1 attempt on it with a size 24mm socket and it slipped. So I inspected the bolt and its already a little rounded so I dont really want to try again yet. Is there an easier way to try and..
10
2013/01/22 12:27:39
rav.dusty

MR2 Rev3 3sge spark plug torque specs

Ive been looking around to find the torque specs on the rev3 3sge with no luck, anyone know?? thankss..

2013/01/18 20:19:01
zvargulis

Is anyone regretting their 6 puck clutch?

Im in need of a new clutch soon with a new turbo being put in From researching the forums the 6 puck un-sprung clutch seems to be the go. Im just wondering, for a street car is this clutch too harsh? I drive about 300Kms a week, my longest drive is about 15min in and out of work so im happy to put u..
8
2013/01/16 09:56:21
Head gasket

Head gasket

G'day, I have a 1990 mr2 manual turbo 3s gtse gen 3 and I'm pretty sure it's blown the head gasket. I have plans on throwing a bit of money on this car but I'd like to get a bit of bang for my buck So just after some advice.... I want a strong reliable motor that isnt riddled with faults .that can..
4
2013/01/14 17:55:16
MR PLOW

Cold Starter Sensor broken?

Hey, was just going through some old receipts from previous owner and found a note that suggests my cold starter sensor is broken. What would be the symptoms, or is that easy to test & fix? There are no error codes showing, but the car does idle high even when warm, and it's pretty thirsty (th..
6
2013/01/12 20:40:03
artymr2

3SGTE High idle and low boost

I recently completed gen3 swap into a 1990 JDM turbo and a couple of small issues need resolving. The idle is a bit high, around 1000rpm, maybe a smidge higher, when warm. if air con is switched on it drops to 750-800rpm. When warming up it sits nicely at about 1500rpm but occasionally flares to 200..
5
2013/01/11 11:48:06
robk

Prepare to cringe

https://www.youtube.com/w...G7Utc&noredirect=1..
5
2013/01/09 14:42:02
Gatesys SW20

Will a 3sgte clutch for an Na

So I've found a new clutch never used but he bought it for his turbo Will it work in my Na it's dirt cheap is the reason I'm asking?..
5
2013/01/06 12:54:56
MRTurbo

Braided clutch line?

So who's fitted a braided SS clutch line and did it make much of a difference in feel, over the stock (old) rubber one? My pedal feels pretty spongy so I want to make it 'feel' better if possible. Any feedback would be great :) Cheers..
15
2013/01/02 10:08:25

<< ..49 50 51 .. - Powered by APG vNext Trial

© 2026 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account