Engines / Exhausts / Gearboxes / Differentials

To Bottom

Engines / Exhausts / Gearboxes / Differentials (p.5)
Post New Thread
Regular
Elmurphy

3sgte Sydney

Hi guys, Looking to convert my NA 91 to turbo. I have the gen2 3sgte (missing gearbox and turbocharger) i have all other parts. I need a mechanic that can start putting her together in preparation for install ( engine is apart atm) Any one to use in particular that knows mr2? Sent from my iPhone ..

2020/05/06 20:20:33
rynex

AWZZ

The longer I sit in my home office. Seeing noone. The more I start to have strange and unholy thoughts. Of 2ZZs in my AW11...
4
2020/04/03 08:52:18
JME

Vacuum 1 Way Valve

I'm tracking down a vacuum problem with me Rev 1 N/A SW20, symptoms are TVIS doesn't activate and cruise control doesn't work. I have found a 1 way valve in the vacuum system (circled in red) but I'm not sure which way around the valve is supposed to face. Is it supposed to let vacuum in to the mani..
7
2020/03/04 18:32:08
BensMr2

Turbo'ing my 3SGE, rebuilding engine for it.

Hey guys, I've had my 1994 Bathurst Mr2 for about 6 months and I really really love the car but I do want to increase the power. I originally had a look for a 3S-GTE swap, but where I live (WA) I'm looking at like 5k (BEFORE shipping) just for an engine, without any of the other parts like ECU/manif..
14
2020/02/05 11:55:11
TwoDogs

Odd Noise

3sgte back in again after solving oil leak (oil cooler seals) as well as investigating low boost. Turns out the old actuator was leaking (which should increase boost) but the hole in the arm was now elongated so I think there was not enough/any preload to keep the flapper gate closed. So bought an a..
3
2020/01/22 15:18:29
TwoDogs

LH Engine Mount Question

G'day Viewers, I have just noticed that my 3sgte RH engine mount brackets (the one that bolts to the engine to accept the rubber mount/insulator and the triangular brace on top) have had their holes elongated due to being bashed by movement due to other loose mounts. I also noticed that the LH mount..
2
2020/01/22 10:11:40
rynex

WTB - AW11 Automatic Shifter Assembly (good condition)

As per the title. Need specifically parts of the plastic clip surrounds of the actual shift knob, however I think it'll be easier to find the whole then than parts. Anyone who's done an auto to manual conversation still have bits? Sent from my Realme X using Tapatalk..
3
2020/01/21 15:22:18
Admin

What turbo is this?

Please help me to identify this turbo, and whether it is high flowed or not. Thanks..
4
2019/12/24 11:36:29
Briandphan

What aftermarket exhaust to get on SW20 NA

Hey guys, time to replace my stock exhaust Rev3 Bathurst. I'm not too sure what to change it to. I would like a deep tone. Open to any suggestions, would like it if i could found them in a store in NSW (Yakuza Motorsports). Cheers..

2019/12/19 07:18:29
Flyboy

My Rev 3 Turbo engine rebuild...please chime in

Ok, so those who know my car on this forum have seen that I have almost fully restored the car back to near new over the last few years.The last big project was the suspension rebuildhttps://www.mr2australia.com/mr2play/tm.aspx?m=141760Now, finally, its time to do the engine...I have booked the car ..
5
2019/11/23 21:42:56

<< ..4 5 6 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account