Engines / Exhausts / Gearboxes / Differentials

To Bottom

Engines / Exhausts / Gearboxes / Differentials (p.47)
Post New Thread
Regular
Moefan01

So My Clutch is starting to slip

Hello allMy clutch has just started to slip on my SW20. I was just wondering what other things I could/should look at while I'm taking things apart. Clutch and gearbox, but what other items would other recommend. ThanksDave..
1
2013/06/11 19:26:19
Randomity

LSD and clutch recommendations for Gen 2 3S-GE?

Hey guys, my clutch is on its way out, and I figure I may as well get the gearbox rebuilt (3rd crunches sometimes) and get an LSD installed while I'm at it. It'll save a ton in labour down the track when both give way. I was wondering what people would recommend for both a replacement clutch (doesn'..
7
2013/06/07 22:26:09
dwyer125

Gen2 block, gen3 sump install help

I remember reading a thread or 2 about installing the gen3 sump on a gen2 engine. I have all the parts needed for this now so I'm hoping to do this. I wanted to re-read the past thread that described this upgrade but still after so many searches I cannot find anything. I just want to make sure I'm g..
10
2013/06/07 14:24:34
Knightrous

Flywheel - Rim Weight Reduction

I'm looking to do a bit of weight reduction on the stock Toyota 1MZFE flywheel I have, which weighs a lot.http://www.midrear.net/images/projects/V6/1MZ_Clutch_Flywheel.JPGI've seen plenty advise to not lighten cast steel flywheels as it might cause the flywheel to develop a crack and/or shatter. Now..
3
2013/06/05 08:59:46
MIDN1T3

Stroker build with Gen 3 block

Hey guys, I've been thinking about a stroker build using a Gen 3 3sgte block and head. At this point in time, this is more informative than anything (I don't have any immediate plans to build one just yet) but thought I might as well check I haven't forgotten anything. Ok - so this assuming you have..
6
2013/06/04 18:07:09
Gatesys SW20

DOING SOME WORK, looking for advice TWOs R US ORDER

Guys, ive ordered a exedy sports tuff hd clutch kit for cheap :P got a rear main comming, just wondering is there any other seals, diff or otherwise i should look at doing, toyota quoted me 5 hours to do the clutch, should i do axle bearings aswell? ive also got a whiteline front sway bar coming, ba..
3
2013/06/03 22:21:13
GTIRHil

Manual for sequential manual transmission

I have a 2000 Spyder with a faulty SMT. I've had no luck finding a manual that includes info for that gearbox. Some kindly person sold me a manual that said it had a section on the auto trans (which might have been the SMT) but turned out not to have an auto section anyway! Can anybody point me at s..
5
2013/05/28 09:03:23
blacky83

Fitting a Hi-Flow Cat

It's a situation I'm sure many of you might have been in before. Getting rid of the stock catalytic converter, but wanting to keep a high flow cat for legalities. I've got a Berk 3" downpipe and a Fujitsubo Legalis R, which provides a pretty free flowing exhaust, but it doesn't..
7
2013/05/23 09:56:26
Head gasket

mod list

I've got my car in with the mechanic now and i say I'lll be loooking at a rebuild, so i was thinking while the motors out maybe i should just get the motor worked.. i was after some reccomendations as of what to do to the motor or should i just let the mechanic know what i want at the wheels and let..
38
2013/05/10 19:17:36
alpinestar

AW11 Bottom end failure. Help with choosing/installing replacement engine.

Hey new to the forum, just picked up a ADM facelift AW11 with a bottom end bearing failure. I'm a 4ag noob. Have replaced an engine in one of my old DR30's before. I'm just wondering other than a sourcing stock standard engine what are my best options and what would need to be changed to get them..
4
2013/05/05 21:21:35

<< ..46 47 48 .. - Powered by APG vNext Trial

© 2026 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account