Engines / Exhausts / Gearboxes / Differentials

To Bottom

Engines / Exhausts / Gearboxes / Differentials (p.42)
Post New Thread
Regular
Treay81

Knocking noise in head / Top end of engine

So I have got my car at a workshop in Dubbo, Trying to get to work last week the car heated up very quickly and began making a knocking noise. The car lost power so i pulled it up and shut it down and had the car towed back to Dubbo. the noise sounds distinctly top end according to the mechanic. Doe..
22
2013/11/27 12:44:44
Gatesys SW20

My gearbox issue.. please look.

So, i have this issue, and ill start from the start. So i had my clutch replaced with an exedy sports tuff kit in July this year. the work was done by Charlestown toyota who i work for, However,it was full of dramas, not only did it take the tech 22hours inn job clocked time and 4 days of my car be..
32
2013/11/27 11:57:14
worldwalker

A few exhaust CADs, 4A bigport, 3VZ and 63mm three bolt flange.

Hi guys, I struggled to find what I was after so I downloaded draft sight and drew up my own. I'm not sure if I designed them right or whether my drafting technique was correct but the end result is a manifold flange for the 4A bigport and 3VZ that is a perfect fit (for the heads I have at my dispos..
2
2013/11/26 12:19:50
ozhummer

4AG(Z)E Rebuild Service

Hi Guys, I've decided to draw from my experience rebuilding the 4AG(Z)E engines and offer a rebuild service. At this stage I want to gauge interest to see if it is something people will take up. My idea is that you drop off your engine, I have made arrangements to have all the machining done by one ..

2013/11/22 11:37:13
VRTULX

3SGE Gen3 VAC hose - need help!

https://www.dropbox.com/s/k7e6o46bnj3z173/2013-11-21%2012.17.12.jpg Anyone else got a Gen 3 3SGE and knows where this vac hose is meant to go?..
2
2013/11/21 13:42:42
Zediah

Looking to replace Clutch, possibly flywheel too

Hey guys, Been feeling it come for a while, but today I was finally able to confirm that my clutch is slipping - and slipping pretty badly. In first gear, anything past 2,000 RPM = no extra forward momentum. So I guess it's time to replace it. What I come here for is to gather your thoughts on what ..
10
2013/11/19 19:11:02
rdenton

Intermittently sticking clutch

So I was driving home from work yesterday (hot day, 33 degrees), when my 92 n/a started having clutch issues. It came on so suddenly, my clutch bite point went from a noticeable distance up, to 1/2 an inch. I had to pump the clutch to change gears a few times. It was on and off - for a few minutes i..
6
2013/11/17 21:35:27
MR2 newbee

Looking for a specialist MR2 Toyota Spyder garage in Sydney

Can anyone recommend a Garage in Sydney that specialises or has expertisewith the Toyota MR2 Spyder's. The SMT light on my dashboard is coming up so I need to get a second opinionfrom a reputed specialist garage. Thanks..
3
2013/11/16 18:35:03
MR2 newbee

URGENT HELP! RED SMT LIGHT ON DASHBOARD

I recently purchased a 2001 MR2 Spyder with only 33,000ks on the clock. Last Sunday I had the red SMT light come on the dashboard. I noticed about three occassions in the last month when I put it into reverse it did not lock into the gear and then last Sunday the Red SMT light came on. It was drivin..
2
2013/11/16 11:42:29
violator

Half cut price

Hi there.What would you say was a reasonable price for a Gen 2 Turbo half cut?I'm talking complete engine with IC, AC, alternator, loom, gearbox and driveshafts.Cheers..
4
2013/11/07 11:08:49

<< ..40 41 42 .. - Powered by APG vNext Trial

© 2026 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account