Engines / Exhausts / Gearboxes / Differentials

To Bottom

Engines / Exhausts / Gearboxes / Differentials (p.30)
Post New Thread
Regular
beast

Blown CV joint. is my Diff ok?

Hi guys, Blew my left rear CV joint to pieces the other day. finally got it up on the lift and here it is.photo7.jpgphoto8.jpgSo we have pulled the cv joint off, the axle looks fine but the diff side looks strange. I think something is going on and was hoping someone could advise. looks like there i..
5
2015/01/15 11:22:51
Ant1

CT20b on gen 2 3SGTE

So since my CT26 is rooted I am looking to get a CT20b as an upgrade. Just wanted to know is there anything I would need or do for the conversion like the down pipe or so? Or is it a straight bolt on? Also if anyone has any tips on doing it that would be great...
19
2015/01/13 11:16:15
sx_corolla

S54-47A gearbox

Has anyone heard of the S54-47A gearbox code? Tried searching with no success Apparently its LSD. And if so, will this bolt straight into my aus spec 94' n/a? I've come acrossS54-692 = No lsdS54-69A = LSD Thanks heaps as always..
7
2015/01/08 14:48:22
Randomity

Engine and Gearbox queries

Hey guys, got a few questions here, all engine and driveline related. Some of them may be totally unheard of, or at least uncommon, so help where you can. :) Firstly, I currently have a 91 SW20 with the Bathurst 3S-GE chucked in, all the loom, ECU, and whatnot out of a wrecked one. Still running the..
6
2015/01/05 12:45:37
worldwalker

A241e AW11 sc trans rebuild costs?

What sort of costs are involved with an a241e rebuild? The box will engage gear but won't deliver power to the wheels. It's hard to tell if its the torque converter or the box. I've since done a manual conversion but have the provision to put the whole lot back to stock. Being a late bui..

2015/01/04 15:08:29
GT-FourRC

Dyno tuning and adjustable cam gears

Hey guys, I am getting my car dyno tuned next week. I own a celica gt4 gen 2 3sgte. When i spoke to my tuner about adjusting the cam gears, he said it wasnt really worth it and that you wont find much more power? Just wondering if anyone on here has had some good results by adjusting the ca..
2
2015/01/03 21:56:49
Nik_Lee

Beems Quad Throttle Manifolds

Just thought a few people on here might find this of some interest. http://sq-engineering.blogspot.com.au/2014/11/now-available-quad-throttle-manifolds.html?m=1..
19
2014/12/29 09:49:34
PeteClarky

Replacing Turbo in Sydney

Car: 1992 MR2 TurboOld turbo: Factory CT26 (worn seals)New turbo: High flowed CT26What needs to be done: Just looking for a replacement at the moment, no tuning or anything. Looking for someone to take off the old turbo and bolt on the new one and make sure it works. I am located in Sydney. Do you h..
1
2014/12/28 15:34:51
Sam_Q

3S Oil pump breakages

I have heard from more than one place now that 3S oil pumps are prone to destroy them self at 8500RPM and over. One guy told me that the drag gets so high that the middle gets torn out of the sintered metal drive pulley. Now I have had taken a pump apart and had a look at how they work and duct the ..
1
2014/12/27 12:34:59
dwyer125

Lets build a 5sgte!

This will be my engine build thread, a 5sgte, and I'll be asking for everyones input a fair bit. It can be the engine we all built together haha.I've rebuild plenty of engines before, but always just standard stuff. All this high powered and custom stuff is pretty new. Give me any bike engine and I ..
23
2014/12/27 10:40:58

<< ..28 29 30 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account