Engines / Exhausts / Gearboxes / Differentials

To Bottom

Engines / Exhausts / Gearboxes / Differentials (p.29)
Post New Thread
Regular
turbomr2

Oil Pump 3SGTE GEN 3

I purchased a new OEM oil pump (15100-88460) and a new pulley (13524-88460). As you can see form the pictures, the new pulley is a different 'design' from what I stripped down from my engine. They match in size and number of teeth thou. Another concern: When I spin the new pump by hand, with and wit..
5
2015/02/09 15:28:46
asimovy

Cause of burning oil?

My car has started burning a bit of oil, I have no idea what is causing it. It seems to only start once the car is fully warmed up, doesn't increase much with rpm, can't see a huge cloud behind me on full throttle or deceleration. I do have a catch can but it obviously isn't working very well as the..
9
2015/02/05 17:14:57
TwoDogs

Bleeding the Clutch line/ Slave cylinder - Solved.

I was trying to bleed the clutch line with my son pushing on the pedal and after a few mins I remembered reading about other people struggling to do it. We were using the same procedure as brake bleeding and progress was slow, then I saw it !!As I opened the bleeder, the clutch lever sprung back, bu..
3
2015/02/05 16:17:37
RHOK

ST185 and ST205 CT26 turbo manifold adaptors

Just adding to the knowledge base This is an adapter for your CT26 manifold to take an Garret T2X ( x meaning any number ) internal wastegate turbo CT-26 Divided to T25 T28 Turbo Flange transition adapt CT26 Manifold Toyota MR2 http://www.ebay.com.au/itm/CT-26-Divided-to-T25-T28-Turbo-Flange-transit..

2015/02/05 09:49:21
RHOK

Rev2 and Rev3 exhaust side manifolds

I will put this here if any one needs in future This is the shape and stud patterns of a Rev2 and a Rev3 exhaust manifold..

2015/01/29 18:30:01
Nik_Lee

3SGTE Pulley's

Hi everyone I noticed a slight noise coming from my A/C idler pulley on the weekend and so I was about to order a new pulley which then got me thinking, does anyone make a lightweight pulley kit for the 3SGTE? It was just a thought that crossed my mind wondering if it would be worth doing whilst I w..

2015/01/28 09:59:55
Kogashiwa Kai

Can head gasket for 4agze be replaced with engine in?

Hi guys,I've noticed white deposits on the underside of the oil cap and am pretty sure the head gaskets gone. Does anyone know or can confirm whether i can change this with the engine in?Also, other then the timing/alternator/supercharger belts and gaskets, what else would be a good idea to replace..
18
2015/01/23 11:55:31
Spaceresearcher

M2 MK1 TVIS Diaphragm and Waxstat Valve (Replacements and fixes).

Hello all, The glorious MR2 MK1 is still my all time favourite MR2, but sadly there are a couple of items which I don't seem to be able to find anywhere? The first is the "TVIS diaphragm"(this is the Toyota Vacuum Induction System). Essentially it's a butterfly valve that sits in the middle of the a..

2015/01/23 11:38:14
Steve_A

Boost Actuated Exhaust Cutout

As a bigger turbo is in the works I've been considering changing from my 2.75 inch exhaust to a full 3 inch setup. But I really like the look and sound of my current setup so I started looking for other options. I came across this setup done by Texas_Ace that has an electric cutout added to the dp t..
8
2015/01/22 20:49:25
beast

Blown CV joint. is my Diff ok?

Hi guys, Blew my left rear CV joint to pieces the other day. finally got it up on the lift and here it is.photo7.jpgphoto8.jpgSo we have pulled the cv joint off, the axle looks fine but the diff side looks strange. I think something is going on and was hoping someone could advise. looks like there i..
5
2015/01/15 11:22:51

<< ..28 29 30 .. - Powered by APG vNext Trial

© 2026 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account