Engines / Exhausts / Gearboxes / Differentials

To Bottom

Engines / Exhausts / Gearboxes / Differentials (p.11)
Post New Thread
Regular
Locked On

Clutch recommendations for 15psi 3sgte

Any got any recommendations on clutches for more boost in 3sgte running more boost than factory ?Thanks..
1
2017/08/11 22:08:15
sir_smeghed

Diff Ratios

Hey all, I'm pretty new to the MR2 scene, I have just bought a 1990 SW20 with the standard MT box (S54?). The car has had an engine transplant from a honda S2000, it's a very tidy job but the diff ratio is all wrong. Currently the car doesn't hit redline in first gear until approximately 90 km/h and..
39
2017/08/09 22:49:58
mcgregor

Differant clutch slave cylinders?

Hey Guys, Im looking to replace my clutch slave cylinder as the whole systems a little funky even after replacing the master cylinder and bleeding like 5 times with vac tool. Anyway I'm looking for parts online for a 1990 sw20 3sgte and there seems to be people advertising parts for 1991 onwards a..
2
2017/07/10 08:34:42
Locked On

3sgte head needed.

So the new project 1990 GT Import , was bought with a blown head , motor is now stripped down and rebored out however the head has been pressure tested and it has failed.... too soft now. So it will require a new one , who has one for sale?Where would the best place to start looking ?Thanks..
2
2017/06/19 11:19:27
whitemr2gt

3SGTE Head Cam Caps

Hi All, I have a 3SGTE head that only has four (4) out of the ten (10) camshaft bearing caps. What options are there for replacing the missing caps? I've heard it's not just a matter of getting a set from another head since they were machined in place. Appreciate both theoretical and practical answe..
1
2017/06/12 09:34:55
DamMR2T

Gen3 turbo crankshaft pulley/ harmonic balancer options

Hi All I need a new Gen3 turbo crankshaft pulley for a 5SGTE build. I have an OEM but engine builder noticed the rubber had started to crack all the way round and obviously didn't recommend it. They did recommend a Ross Tuning ine， but they are Gen2 only. What other options are out there， and i..
13
2017/05/18 16:58:35
TwoDogs

Coolant Leak

My 3sgte has a slow leak and the only evidence I've seen so far is a few drops on the big cross member brace on the air intake side. Besides the hoses that feed the throttle body, and the head gasket, what else might leak over that side of the donk? Cheers,..
2
2017/05/16 23:04:48
attycuz

High idle aftermarket ECU

Hey guys! I have a 1990 turbo and it has a high idle on start (around 2200rpm) once it warms it drops to around 1500rpm but at times also goes up and down between 1000rpm and 1500rpm. I'm not that good on engines but I don't think it's a leak as I'm boosting around 8psi (not sure if this is normal o..
5
2017/04/21 16:04:19
spyderballer

Anyone have a non-beams sw20 with a factory LSD diff?

Hi guys,Just wondering if anyone here has a non-turbo non-beams engine sw20 mr2 that was fitted with factory lsd gearbox?I believe that only 1996-early 1997 mr2s may have this option.If you do, i would really appreciate a picture of your chassis plate as confirmation. (located in frunk) We run a Toy..
4
2017/04/15 16:58:25
Phiz

Zzw30 LSD

How well do they hold in the dry? Will be for the driftcar.. Thinking of just welding it, will save a lot of hassle and it's already out...
2
2017/04/03 10:31:39

<< ..10 11 12 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account