ARCHIVED MESSAGES

To Bottom

ARCHIVED MESSAGES (p.14)
Post New Thread
Regular
Road and Track

SW20 gear lever boots

genuine Toyota leather ones are now back in stock. these include the plastic ring around the bottom. $62..

2008/09/01 18:06:47
Nathaniel

sw20 clutch

Hi guys, i live in the Brisbane CBD area and was wondering the cost of a new clutch for the MR2 i just bought. WHen it comes on boost the clutch slips then grabs again, amount of slip depends on cars speed and rpm. Also wondering if you guys are able to tune microtech? Thanks, Nathan..
3
2008/08/19 12:18:29
corkey

turbo

hey terry is corey, just fitted the ct20b back in the car and its dripping oil between the exhuast housing and the dump pipe?? havent run the car for too long, just wanted to get your thoughts. also is there a wearing in process for the turbo bushes i should be aware of??..
3
2008/07/05 11:34:35
Road and Track

we now do all turbo repairs & mods in house

due to demand, we have geared up to overhaul, repair and modify the common CT26 & CT20 Toyota turbos. We use the latest garrett repair kits which have modified seals for longer life. oversized bushes, repaired housings etc are all possible. There is some scope to high-flow the 26 using a Supra wheel..

2008/07/02 19:21:49
lewisde

MR2 3sgte CT20B

My CT20B is on the way out. What, if any options do you have available to replace same. Regards & thanks Derrick 0401137787..
1
2008/06/29 20:11:57
Road and Track

Std & Hi press pressure safety rad caps now avail

we now have a better alternative than the ridiculously expensive TRD radiator cap. we now have stocks of STANT (USA) caps for $27.50 incl GST but plus post. These also have a safety relese lever that allows you to vent any steam to the overflow bottle. They come in standard 13 lb (90kpa) or 16 pound..
2
2008/06/24 08:31:36
MountainMan

Help Road and Track 4agze mr2

Hi Terry and Cindy. The tensioner for my supercharger came off and flew down the road, and i desperately need my car for work. I am running a 180mm NST kit. NST didnt reply my emails and my work is getting tired of my car being parked in the workshop. If you know the part number, i can go to bear..
7
2008/06/18 20:31:25
jamienumber9

AW11 distributor cap

Just to be sure.... I'm after a dizzy cap for my aw11, which looks like this one: http://us1.webpublications.com.au/static/images/articles/i27/2733_6lo.jpg NOT this one http://www.leded.com/my4age.JPG So, I'm after a "side entry" cap, am I right? Just want to make sure I c..
2
2008/06/18 20:30:33
Ryano1911

o2 Sensor

I'm chasing a single wire o2 sensor for my 90 sw20 turbo, Can you guys supply me one???..
5
2008/06/09 23:16:26
MidnightCruiser

AFMless ecu options

as the title states thinking of purchasing an intake manifold (+other goodies) with 4 separate trumpets so wont be any room/place to have an afm what are my options? (i have gen1 NA sw20 mr2) i heard that you can make up some trumpets what ecu do you suggest your customers running this setup use?..
1
2008/06/07 15:02:38

<< ..13 14 15 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account