General MR2 Stuff

To Bottom

General MR2 Stuff (p.34)
Post New Thread
Regular
ARegoli

Common Problems to look for when buying an MR2?

I'm looking to purchase an MR2 some time in the next year, and I'm just wondering what should I try to look for when I go to inspect a car. Generally looking at the 94+ Bathursts N/a as the P plate laws mean that I can't get a turbo...
15
2015/08/01 19:57:53
mad max mr2

MR2 WHEELS

Hi everyone, my name is Max and i'm in a world of hurt. I have a stock 1990 MR2 SW20, which I am driving at the Island 6 hour on August 1. The car has stock wheels (14 inch), and I find I can't source any good rubber for track work. No problem I thought, tried some 17 inch wheels, rears fit but the ..
3
2015/07/31 16:15:48
Phiz

Decisions..

Either... Build a track ready N/A. I already have a spec sheet of what I am planning to do. Or.. Buy a turbo motor and convert it. I got quoted by mrmr2 3.5k for a full conversion including inter cooler, ect, alternator (100% bolt in). Would it be cheaper to buy a halfcut/wreck because I..
6
2015/07/16 07:48:19
Hoonsy

Possible vacuum leak

So I think I may have a vacuum leak. I have the whining sound while driving, however I wasn't keen to do the carb cleaner test that most people recommend since it can prove to be dangerous. I did a compression test on my car a few weeks ago and I got 150/151 across all 4. My friend who owns a 1990 ..
12
2015/06/29 14:52:08
REDMR2RED

WTB AW11 Door and Ignition locks

Anyone parting out an AW11? I'm after an ignition lock and both door handles with locks, preferably keyed alike with key from the same car would be ideal. Some low-life used a large screw driver to break into my AW11 through the drivers door and the same tool to force the ignition. They forced the d..
2
2015/06/20 15:41:43
Andrewmr2

How to block fuel send line

Hi all, I am in the process of dropping my engine and the last thing i need to disconnect is the fuel send line from the fuel filter. When disconnected from the top the filter leaks fuel. How have people managed to block this off as putting the banjo bolt back in the filter doesn't seal properly. Th..
5
2015/06/17 13:43:13
rod baker

stuck cv in drive hub

hi all has any one else had this problem ,my cv will not move at all removed the big nut and ive destroyed one puller ,then i tried a hydraulic puller and a little heat from the oxy but to no availthinking of pulling whole shaft from motor and taking to with a press 'i dont want to damage th threads..
4
2015/06/15 16:25:57
92 Hard Top

Track it or Wreck it?

The insurance company wrote it off as I bend the chassis rail. I could get the chassis rail pulled out and use for track only. Or sell it as a half cut. What do I do? It owes me nothing, Thanks to the insurance company. It's JDM late 92 sw20 Hard Top with only 99000 kms on it. With a rebuild motor a..
15
2015/06/12 17:30:08
Cash

3sgte

Btw is there any difference bw gen2 n gen3 3sgte beside turbo sizes? Ta..
4
2015/06/03 14:26:22
Cash

General info.

Hi guys, Just wondering 1997 N/A Australia delivered engine block, is it any difference to 3sgte engine block? If not, can I use my N/A engine block bolt on 3sgte parts or Shud I just rebuild my N/A? and does toyota still sell under trays and seals? Thank you for all the thought...
1
2015/06/03 11:49:49

<< ..34 35 36 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account