HELP - URGENT!!!!!

To Bottom

HELP - URGENT!!!!! (p.50)
Post New Thread
Regular
Blue2

wiring for engine bay fuse box

Anyone have the diagram for the harness going to the fuse box in engine bay? I wired 3 wires into one of them as a trigger for relay and now my injectors are flooding badly. Guessing I might have used the injector or something and its overloading causing it to flood. Thanks..
1
2013/07/14 17:40:19
stuka

Car Wont Start - Tried All The Obvious Stuff

I haven’t been able to start the car for a couple of weeks now and I cant figure out why. Two things I have done that might have affected this 1) I removed the resonator from the intake and maybe disturbed something 2) I let rain get in the engine bay (yes I know Im an idiot already!) I have checked..
17
2013/07/14 14:33:33
dennis the menace

AW11 rear buttress trim and screen cover removal

Greetings all, I'm looking for feedback from those of you who have successfully ( let me stress that magic word successfully) removed the trim from the rear. I have a car in need of an unbroken trim, and a project car that is currently wearing a good set. Only problem is that attempts at removal of ..
6
2013/07/10 12:01:14
Benaw11

1992 sw20 turbo (import) ECU errror code problems

Hi all have had the engine light come on in the Mr2 so i put it into diagnostic mode and have received these 2 codes.....first one it flashes for 4 straight then a small gap then flashes for 7 then a really long break then repeats with the 4 and 7 etc.Can anyone please tell me which codes these are ..
1
2013/07/09 11:21:00
swifty

ENGINE RATTLE ISSUE

Hi guys, Stuka just came to have a look at the engine and we noticed a distinct non-constant rattle noise at a certain rpm. Stuka thinks it may be coming from around the crankshaft area Any ideas what it could be?..
6
2013/07/07 10:54:33
twomr2`s

need to borrow a rev1/2 crossmember (WA)*sorted thanks*

sorted,thanks..

2013/07/01 22:25:57
D.J

Need to borrow a Gen II 3SGTE ECU in Sydney

Anyone got one I can borrow (south west) to determine if my ECU has gone faulty or it's still a different ignition/spark problem. Cheers...
1
2013/07/01 22:06:53
Ace

Broken Wheel nut removal

Hi just bought a sw20 couple weeks ago and last night I was trying to take my wheels off and the nuts on there are the Allen key type ones. The nuts are done up way too tight and i ended up snapping my tool in there. I tryed drilling a hole and screwing a self tap bolt then slide hammering the broke..
6
2013/06/30 00:26:10
Blue2

Power FC help

Does anyone know, what the IDLE sensor in power FC refers to? I looked in my sensors screen which shows what's on and off, voltage etc. And the idle is off. Anyone know what it is referring to?..
5
2013/06/29 04:42:06
rogerlam

Accidently touched -ve witch +ive wire - interior lights not working

Hey guys, so I was replacing the hazard light and cigarette lighter bulb and I heard a 'zap' sound and all my interior lights turned off. Now my sidelights, tailights and gauge lights don't work.Any help where the fuses are located?..
2
2013/06/26 20:05:26

<< ..49 50 51 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account