HELP - URGENT!!!!!

To Bottom

HELP - URGENT!!!!! (p.49)
Post New Thread
Regular
jlee165

1991 MR2 A/C Problem

http://www.mr2australia.com/mr2play/tm.aspx?m=97712..

2013/08/05 12:28:31
track_mr2

MR2 Gen 3 Turbo error code 12, oil/fuel out of turbo

Okay so I took my car for a quick drive around the block as its been having trouble starting. After sitting for a few days often if I go to start the car it make a horrible metallic clunk sound and the engine seizes. If I try turning the ignition it wont spin, like the engine is completely seized, t..
20
2013/08/02 21:34:59
jlee165

Mr2 1991 Boot Problems

So my 1991 MR2 GT's boot wont open with the key.The little handle in the car works (You can hear the cable moving), but the boot doesn't actually pop.Anyone know how to get in their and fix it?..
2
2013/08/01 20:08:40
Blue2

Gen 3 in Sydney - Urgent

Anyone in sydney have a gen 3 i can compare my engine with today? Need to doublecheck the vacuum hoses etc...
4
2013/07/31 13:07:51
jlee165

WHAT MODEL IS THIS MR2?

http://imgc.classistatic.com/cps/blnc/121116/537r1/3050ml6_20.jpegPLEASE help me indentify this car and get me these 2 peices of data- Kurb Weight, Max KwI've looked for ages but I can only seem to find the specs to the 1990 or 1992 models. Any help would be greatly appreciated! I also know the turb..
18
2013/07/31 07:07:20
sx_corolla

Cold start issues

Hi Everyone, Had some issues starting up my car (sw20 N/A genIII) recently had has slowly gotten worse. Starting my car in the morning it usually idles at 2000k and eventually warms up. Recently the car sputters and sounds like its struggling to start up/running very rough, revving under 1000k. Take..
5
2013/07/23 20:12:23
LeBandit33

Aw11 extractors

Hey all, I'm looking for some 4age extractors and I am wondering if they are any different to FWD extractors! Or if anyone knows where to buy a set I'm all ears! Cheer in advance :)..
10
2013/07/19 22:28:46
Blue2

O2 sensor advice

Guys the guy who made my dump pipe made a big bung port. It's a large screw in port bigger than 20c piece. Stock o2 sensor doesn't fit. Should I A. Get the stock one fitted by exhaust shop by adding or modding the bung? B. I thought about getting an aftermarket 4 wire that is screw in but hav..

2013/07/18 22:54:43
flypig

Recommend Engine Builder/Mechanic - [SYDNEY]

Hi guys, I bought a 95 gen3 hardtop turbo late last year, it was meant to be a budget track car and end up needs an engine rebuild urgently. Over the last 5 months with only 10 minutes enjoyment, now the car is sitting at friend's workshop collecting the dust. Can anyone recommend a good engine buil..
8
2013/07/18 13:35:16
Scott

Premature starter

After changing to a new loom which required a change in alternator oil pressure and water temp plugs I have found when turning he key to the ON position the starter motor is engaging and trying to start the engine? HELP..
10
2013/07/17 21:17:38

<< ..49 50 51 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account