HELP - URGENT!!!!!

To Bottom

HELP - URGENT!!!!! (p.37)
Post New Thread
Regular
robk

Spare bolts needed (photo within)

Does anyone have any spares of the bolts shown in the photo below? http://i13.photobucket.com/albums/a284/rollinrobo/MR2/DizzyHoleBolts_zps988b3ce4.jpg My mechanic removed those 2 bolts so a metal plug could be installed in the distributor hole after the distributor was deleted, but the heads of the..
10
2014/04/17 09:35:40
Treay81

SSR Professor SP1 Stolen off car from workshop - NEWCASTLE AREA

Hi guys, Well, pretty happy with a phone call I received this morning telling me about all the new goodness going into my engine. New crank, Forged JE Pistons, Manley H Beam rods, Head has been rebuilt, race spec bearings etc etc. However, Someone has broken into the workshop yard last night, and th..
11
2014/04/09 12:57:16
qube

Driver window won't close

Had a weird problem today where I tried to put up my window in my SW20 and it just stopped halfway up and wouldn't go up any further with the switch. When I pull it up with my hands and close the door it slides down a little. I don't believe it's an electrical fault as it goes down fine and if it's ..
1
2014/04/08 11:10:24
Gog975

Rear qtr panel replacement

Hi guys so I'm doing a bare metal respray on my new sw20 project and found while rubbing it back that the drivers side was full of bog, by the look of it that qtr has been replaced at some stage and had dings pulled out of it at a later date and just bogged to finish, not exactly happy with using bo..
1
2014/04/08 11:04:27
Eckers

Manifold maker/ copier required for my T-67

Hi Guys, trying to get the car back on the track and my turbo manifold is full of hairline fractures and needs replacing. After buying one on the net (and being ripped off close to a grand) i need to get one copied from my current one. My useless internet skills have been highlighted by not being ab..
5
2014/04/03 09:43:22
Carmikey

NEEDED! 6 SIDED LUG NUT TOOL / KEY [PURCHASED]

Does anyone know where I can located one of these lock nut tools from locally - meaning in Australia? Some how lost mine, & need to get my wheels off. Anyone have one they are no longer using? See picture...
8
2014/04/01 21:21:49
Buzza1995

what is this sensor?

Hey guys just got a mechanic to plumb my zzw30 engine up due to lack of time with work to do it myself and putting it the intake and exhaust in I've ran into 2 problems firstly what is this sensor and what hoses connect I've found the electrical plug just need to hook the hoses in! https://..
5
2014/03/28 19:16:49
Steve_A

Alternators keep getting water damaged!

So I've just replaced my third alternator in as many yrs each one ruined by water getting into them! Has anyone here had this problem? The car is an 1991 NA, and I've heard this is an issue for these older cars. Basically water drips straight through the left hand hole in the engine lid and straight..
7
2014/03/28 09:37:00
Buzza1995

HOW DO I RESET CLUTCH ACTUATOR MR2 SPYDER

Hi im putting in a new 1zz its sitting here with a new clutch on it and once in i need to reset the clutch, It has a SMT transmission! Whats the process to reset?..
5
2014/03/19 16:42:52
turbomr2

Australia to Malaysia

Hey guys! Pleeeeeeeeeeeze help! Just wondering if there any kind, thoughtful MR2 enthusiast (like me) coming over to Malaysia from Aus who would not mind bringing in a Speedo Cluster for me....... Thank You soooooo much!..
5
2014/03/18 03:00:52

<< ..37 38 39 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account