HELP - URGENT!!!!!

To Bottom

HELP - URGENT!!!!! (p.33)
Post New Thread
Regular
Mr2Al

Clutch Acuator/Ecu problems - HELP!!!

Hi all. I desperatley need some advice/help. A proud owner of a late 2002 MR2 Spyder 5M, well looked after and only 90, 000km, I have noticed that the car will make a beeping sound all the time and at random times. The last time I drove it it had a massive loss of power going up a steep hill, and it..
10
2014/10/07 14:03:03
banner

How to remove Turbo driveshaft from Hub

I can't remove the driveshaft from the hub. I've tried wedging a breaker bar amongst the wheel studs and turning the centre socket, a rattle gun at highest setting and soaking the nut in WD40 over three nights. My brother stood on the axle whilst I put my weight on a breaker bar to remove the shaft...
6
2014/10/07 07:31:32
5SGTE

Wanted to Borrow/Possibly buy pretty please

Hi All, some may have seen my other thread chasing error code 14. I would like to rule out the ecu as this is one of the things the BGB suggests as code 14. Part no on the ecu is, 89661-5711. This is from an ADM 94 Bathurst. If someone wants to post, meet up I'll make myself as flexible as I can. Th..
6
2014/10/05 21:22:05
Carmikey

4age 20v silvertop VVT pulley?

Does anyone know best place / price to get a new VVT Pulley for my freshly rebuilt 20v ST? Didnt realise they were sooo expensive.. Does anyone know, other than the diesel noise they make when they are bad if there are any other side effects running the engine in this state? Aparently it is a know i..
1
2014/09/24 13:33:59
Guest

Project MR2 - click noise in gear box / engine sitting off square / timing

Hi All, I recently purchased a MR2 1993 Rev 2 Turbo unseen, and landed one big project. A few issues where any information will help; 1. Click noise in the gear box as you turn the wheel. 14 clicks per revolution. Any ideas? 2. Engine shows the drivers side engine mount as pulled out the side of the..
13
2014/09/19 06:33:57
Mewrt

Rev1 JDM 3sge idle issue

Hey guys, decided to replace the rocker cover gasket on my latest acquisition, cleaned intake plenum and T-VIS plenum, masked and painted, put everything back together, Started, runs and drives fine, yet the idle is erratic, on startup idle is 2K rpm then hunts rapidly 1800-2000 cyclically, threw fa..
14
2014/09/14 16:44:40
Ryan888K

2002 MR2 Spyder w/ 2ZZ-GE Turbo

2002 MR2 Spyder w/ 2ZZ-GE Intercooled Turbo & 5 speed sequential gearbox. Is anyone here running this setup? I have recently bought one and it seems as though when the car was built 3 years ago, this was uncharted territory. I have recently gotten in touch with the mechanic who did the engine sw..
19
2014/09/09 15:13:21
Guest

project mr2 - power steering - this is weird

Hi everyone, I am searching the internet with no luck on a few things. I bought a MR2 with a lot of love needed. The problem; Power cable next to the battery was not connected. I had no powersteering. I connected the wire and the powersteering pump runs continuously. More alarming is when the..

2014/09/08 14:54:08
Dudeman

Now that toyodiy doesn't have part diagrams - where to go?

I remember a thread a few months ago pointing out that toyodiy removed the part diagrams, pretty sure there was an alternate site mentioned. I can't find that thread! Can anyone show me where to find the elusive diagrams please?..
11
2014/09/04 17:58:22
Steve_A

!!!No Tacho Need to get RPM from Speed in gear for Trackday!!!

Hi guys, So the car is a manual NA SW20 1991. I need to know what the speed at 7000RPM would be in each gear so I know when to change gear for a track day this Sunday. I had hoped to fix the issue today by putting in a turbo cluster I had lying around and which I was told should work but now its in ..
12
2014/08/30 22:37:09

<< ..31 32 33 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account