HELP - URGENT!!!!!

To Bottom

HELP - URGENT!!!!! (p.31)
Post New Thread
Regular
MR PLOW

CT26 needed for MTC2015

HELP! - Anyone got a spare CT26 lying around that could be swapped into my Gen2? I've got an oil leak in mine I believe, which is frustrating as the turbo was reconditioned not long ago. Either Sydney based or travelling to the event...PM me or call 0410 585 639..
5
2015/01/09 19:31:33
Ballzy

Please can someone help!

Hi guysPlease you recommend someone that can help me with my 4AGE silver top running too (way too) rich, might be the cold start injector, but I'm not even close to being confident enough to start playing around with it.I'm based on the gold coast, willing to pay for the help, not expecting freebies..
6
2015/01/04 12:54:45
xeon8

Suspension Woes

Hi all, I've recently changed all 4 shock absorbers however I have discovered a clunking/knocking noise coming from the rear of the car regardless if I'm driving or just bouncing the car up and down in the garage. I suspect its an issue with the strut tops/mounts, and I've talked to my mechanic who ..
11
2014/12/19 15:52:35
GT-FourRC

Link g1 ECU base map for 3sgte

Hey guys, Getting my link installed next thursday and don't have a base map. Contacted link and they said the older model ecu doesnt have a base map for the 3sgte. Hoping someone of here has one? Any help would be great! Thanks..

2014/12/04 21:07:29
MIS002

New belt moulding causes scratches on window!!!

I just bought a new belt moulding for my MR2 Sw20 the rubber bit that runs along on the outside between car handle and window. I was so overwhelmed when I bought and fix it cause my old one has already shown the metal side of it, the rubber was peeling etc. When I rolled up my window aaarghh to my d..

2014/12/02 23:18:17
DPL

Clutch issues

Hi All Does anyone have any advice on the cause of the following problem, I drove to work today and the effective point of the clutch slowly deteriorated to the point where I was unable to shift into any gear from neutral at the lights. Pumping the clutch in neutral seemed to restore function. I mad..
9
2014/11/28 21:01:27
NFN2IT

Radiator hose diagram help

Hi guys, I have a 90 model MR2 SW20 and am in the process of trying to replace all the rubber hoses for cooling system from the radiator through to the back where the motor is. Can anyone help me out with a hose diagram so i can use as a guide???? would make life so much easier. Thanks..

2014/11/28 10:40:03
mr2twanted

Body repairs, restoration & imports

Hi Guys - as my search for a stock & straight MR2 turbo continues I'm beginning to realise that the odds of finding become less with each passing year. I would prefer Gen 2 or later and HT over Targa but many I have inspected have dreadful at times suspicious spray jobs (I would prefer something..
8
2014/11/26 09:32:02
92 Hard Top

ISC Issue

I have removed my AC for MTC15 to save weight. Does this cause my idle to be higher? As it seems be idling about 1200 to 1300 rpm when warm. It was not doing that before...

2014/11/24 20:18:59
92 Hard Top

Oxygen Sensor info

Does anyone know the voltage range of a 3sgte Gen II Oxygen Sensor? As I am replacing it with a Innovate MTX-L Gauge and sensor. Need to know which wire I will use for the new sensor Yellow Wire is 0v =7.35AFR and 5V = 22.39AFR. Brown Wire 1.1v =14AFR and 0.1V = 15AFR. I only want to use one sensor ..
6
2014/11/23 23:51:31

<< ..31 32 33 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account