HELP - URGENT!!!!!

To Bottom

HELP - URGENT!!!!! (p.3)
Post New Thread
Regular
RAY MR2

Front Brake calliper Kit SW 20

Need some help to locate a kit for front brake callipers for 95 SW 20 Bathurst.I have tried several Japanese firms and they are out of stock, part number I need: 04479Any help gratefully appreciated. https://partsouq.com/tesseract//assets/global/TOYOTA00/source/47/470753.gif..
2
2020/08/19 14:53:26
1993MR2GIRL

Sw20 starts fine when cold but dies when it gets warm

Please help we are trying everything and could use some tips My mr2 has been starting up fine but as soon as it gets warm is starts to misfire and die and I can’t start it till it’s completely cold. We have replaced the ignition coil to a brand new one, we are going to change the ignitor. But we ge..
5
2020/07/22 11:20:06
RAY MR2

Lower tie bar for 95 SW 20

Help please, I've tried to contact Josh in Bendigo to no avail.I need a lower tie bar. It's the steel bar that goes under the radiator between the frame rails.Its welded to the frame rails so will have to have the welds cut or drilled out.Anyone with a wreck or front half of a half cut in NSW prefer..
3
2020/07/19 14:45:01
1993MR2GIRL

Cigarette lighter not working 🙃

Could anyone give me some help. My cigarette lighter has stopped working. I have checked the fuse and it’s fine and I have checked the L shape solder on the back of the assembly and it’s all intact. 😢 Sent from my iPhone using Tapatalk..
1
2020/07/16 15:39:01
92 Hard Top

Gen 2 SW20 Oil Pump

Need a second hand Gen 2 SW20 Oil Pump for a part. Please not one of a cooked (overheated) engine. Just need the Oil relief valve spring please. Can be 3sgte or 3sge...

2020/06/11 12:16:50
ps

W30 Transmission Problems

Hi, I have a 2003 W30 with a major transmission problem and seeking help on fixing the issue if possible!I love the car but not sure what can be done. Last time it drove, the transmission got stuck in between gears and it was a pain just to get it in neutral. Apparently this is a common problem wit..
2
2020/05/23 11:46:49
92 Hard Top

SARD Fuel injector

Need some help I have a set 850cc Side feed injectors. Injector code 63507. I'm after a dead time chart. All I know is it's 0.85 m/sec. I don't know at what voltage? At a guess may be 14V. Need dead times for 10v, 11v etc . Need this info to set up my Links G4+.Can someone Please Help...

2020/04/22 16:42:59
Eric

1990 jdm 3sge ecu pinouts/wiring diagrams

Hi eveyone Looking for 1990 JDM 3sge ecu pinouts and any other wiring info anyone may have I have the BGB and have looked for ages on the net and have found nothing engine is going into a RA60 celica thanks -Eric..
3
2020/04/08 08:08:13
mr spider

Climate control variable temp slider.

Hi guys, MR2 sw20 variable temp slider that connects to the rear of the climate control panel. It seems to be playing up and not engaging the AC when set to cold temp. It is a 3 pin plug type. Does anyone have one for sale or is it available new?..
2
2020/01/25 20:02:23
Freebee

SW20 T-top Seal Part NO.'s

Hey Guys, I'm trying to order some new (body side) T-top seals for my SW20, but have discovered that there are 3 different part no's for each side, which are suposedly applicable to different years. eg. (Right)63627-17020 (1989/12 - 1991/06)63627-17021 (1991/06 - 1993/09)63627-17022 (1993/09 -) With..
1
2020/01/07 21:11:00

1 2 3 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account