HELP - URGENT!!!!!

To Bottom

HELP - URGENT!!!!! (p.28)
Post New Thread
Regular
pointmick

schemetrics for oil temp sender sw 20

i have a faulty oil temp sender how can i bypass it ? does anybody know wat resistance its running how can i stop it dragging down the alternater ?..
3
2015/06/11 07:46:30
pointmick

schemetrics for oil temp sender sw 20

i have a faulty oil temp sender how can i bypass it ? does anybody know wat resistance its running how can i stop it dragging down the alternater ?..

2015/06/08 23:17:19
B24

Help with CAD for manifold

I have been building a 2GRFE over the past 12 months which will be installed in the car in June. To maximise all the work that has been done on the engine a better intake system is required. The standard runners taper out as it engages with the port. The best way to solve this is with a decent ITB o..
9
2015/05/31 12:42:59
Glenjo

'95 3SGE into '90 body?

Hi Guys, Mate of mine has purchased a 1990 N/A SW20 with a blown motor. He has lined up a rebuilt N/A 3SGE, but it is out of a '95 SW20. Is this compatible? Or does he need the '95 ECU & wiring loom to go with the motor? And if so, how much drama is he in for swapping the electronics?? Th..
6
2015/05/29 15:12:25
initialvin

Help, the car suddenly stalls on the road and won't start back up

finally saved up for a Mr2 Sw20 1993 turbo import hardtop test drove it yesterday was driving okay, but it stalls on idle twice,the owner told me the car had been sitting there for 2 weeks,I start the car back up no problem at all, before I offer to buy it I let it idle for 5mins, no cut off this ti..
27
2015/05/08 22:03:48
MR2newbie

engine gearbox separation

All bolts are undone, starter motor is out, I have approx 10mm of separation, but alas it won't go any further..... Need help pls...cheers..
2
2015/04/24 17:50:32
Tony

MR2 SW20 turbo...cold start idling issues after engine overhaul.

Hey guys,Just got the engine back in after 8 months of fiddling. Redid the clutch, timing belt, points, plugs, cold start sensor, replaced corroded water pipes...(the water was very rusty) When we start the car it idles badly, smells like it is burning a bit rich,, cuts out, but when warm. it seems ..
5
2015/04/19 17:24:53
mymr2

Speedo Not Working in 1990 SW Turbo JDM

Hi All. Found the speedo not working. so did the drill check on the cables and all cable work through to gearbox. I have the instructions to remove the speedo sub assembly. Has anyone had to buy on of these nylon gear wheels that go into the gears box and know the part number and which Toyota dealer..
6
2015/04/16 14:57:02
Ray-MR2

Window glass regulation

Can anyone help me with a small problem? The glass is coming up too far on the door window, making it nearly impossible to close the door. It comes up about 7 to 8 mm to far. Can someone please direct me to where I might find a setting I can adjust the stop on the power windows? 91 SW-20..
1
2015/04/09 12:42:43
MintCondition

Any reliable mechanics around Kensington/ Kingsford?

Hi guys, new member and would like to know whether or not there are any mr2 specialists around eastern Sydney. Preferably pick up too. Just found some oil dripping below the engine so probably be a good idea to get it checked out by someone who knows their stuff and not too far away. Cheers..

2015/04/08 23:38:05

<< ..28 29 30 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account