HELP - URGENT!!!!!

To Bottom

HELP - URGENT!!!!! (p.19)
Post New Thread
Regular
Timclarkee

Gen 3 3SGTE swap

Hey guys, recently I swapped a jap GEN 3 3SGTE into my 1997 Bathurst mr2. The turbo motor was running in a donor car prior to the swap and I have removed all the running gear and swapped into my NA shell. It runs the standard gen 3 wiring loom harness with a apexi power FC ECU. The problem is it is ..

2016/12/22 19:12:58
SW20_3sgte

Trying to contact Nelly G member

Hey all,I'm just wondering if anyone may be able to pass on my details onto a member on here called "Nelly G" https://www.mr2australia.com/mr2play/Profile/5640/ Been liasing with them through pm regarding some parts they have for the last few months but have since lost contact. I believe his name is..

2016/12/22 16:17:06
Gog975

Lowering sw20 na

Looking at lowering my sw20 na as the stock shocks are worn out and currently way too high (stock height) would these be a good setup? Would run coilovers but wheel choice wont allow it without spacers and dont want to run them...
6
2016/12/22 12:29:08
Timclarkee

Gen 3 3SGTE Parts!!! Urgent.

Hey guys, need by tomorrow or following day. A standard gen 3 3SGTE ECU. A standard gen 3 INJECTOr RESISTOR The standard gen 3 air flow metre Thanks guys 0479101658 Tim...
2
2016/12/21 14:02:51
marin101

Stock REV 2 3sgte ECU OR Aftermarket

need one pretty soon as its my daily....water damage killed the last one. Im in Sydney. Thanks...
2
2016/12/20 10:10:28
Timclarkee

INJECTOR RESISTOR PACK!! 3SGTE

Hello! Need a INJECTOR RESISTOR PACK asap for a gen 2 or 3 3SGTE !! Located in Melbourne diamond creek 3089 0479101658 Thanks in advance..

2016/12/19 17:58:58
Sw2091

Fuel pump kill switch

I need help installing a kill switch and want to know what wires I need to splice into and where I need to cut. Cheers in advance Sent from my GT-I9505 using Tapatalk..
1
2016/12/12 07:56:11
Sw2091

1990 sw20 zenki tail lights problem

So half of my tail lights light up when just the lights are on but when I brake the two sides of the tail light come on. The side that doesn't work is the small rectangle that is closer to the Centre garnish. Cheers for the help in advance Sent from my GT-I9505 using Tapatalk..
1
2016/11/29 09:26:34
terrytercel

WANTED URGENT Complete Brake Booster with Master Cylinder MR2 mk1 '85-'88.

Morning all,I am after a working (or to be refurbished)Complete Brake Booster with Master Cylinder MR2 mk1 '85-'88.I am running out of time to have current one RnR.Have to source one by Monday 21st Nov. Im new to mr2au so not sure where to post this post. All and any leads GREATLY appreciatedjEN..

2016/11/20 11:33:15
92 Hard Top

Need a Solenoid Resistor

Does any body have a Solenoid Resistor? Plug D shape not the round plug...
13
2016/11/17 06:52:42

<< ..19 20 21 .. - Powered by APG vNext Trial

© 2026 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account