HELP - URGENT!!!!!

To Bottom

HELP - URGENT!!!!! (p.17)
Post New Thread
Regular
Canberran

Cup holders

Hi, Just wondering what options I have in terms of getting some cup holders on my MR2 SW20? I know someone on the forum was selling the ones that hang from the storage area on the door but I'm worried they might get in the way and I'll spill my drink! I was thinking along the lines of a sing..
10
2017/03/01 14:37:35
bryce

gearbox help

hey all. i have an aw11 with a 3sgte (gen 2) not sure what year it is though. i do know it has an LSD so i think its an E153? i have pulled it apart and now wondering where the best place is to get the replacement seal? aswell as the tubular circlip thing that holds the axle in the box/ housing? can..
1
2017/02/27 07:12:46
Sw2091

Shifter sits forward

My shifter sids forward and in 1st 3rd and 5th it makes contact with the plastic trim and in 2nd 4th and reverse it sits where it normally would for reverse. How can I fix this. Cheers Sent from my GT-I9505 using Tapatalk..
6
2017/02/25 19:43:50
Sw2091

Indicator and high beam problem

Hey all. My hazard lights only seem to be lighting up one side of my indicators (drivers side only lights up) and was wondering how to fix that. Also the high beam light does not display on the dash. Cheers Sent from my SM-G920I using Tapatalk..
3
2017/02/24 20:21:40
jlee165

Blow Off Valve Cylinder?

Replacing my rocker cover gasket today I managed to destroy the cylindrical part circled in the picture I have attached. If you can't tell the picture is of the blow off valve. I would like to know what the part is so I can replace it. Thanks in advance! -I also posted in MR2>General MR2, remove if ..
2
2017/02/23 21:39:23
Sw2091

Buying a car from interstate

Hey all I am just after some info on how I go about getting an unregistered car back from Sydney to adelaide. Cheers Sent from my GT-I9505 using Tapatalk..
3
2017/02/21 00:39:27
Juttyboy

Aw11 turbo

Who here has actually built an aw11 4age bigport turbo? Very keen to talk to you. Need some advice...
2
2017/02/14 09:50:09
stuka

Part Number Help

This is a repeat of a post in another forum section. Im looking for some help with part numbers for those with experience building gen 3 turbo engines. I have had a look on the following website but am struggling with a few things www.jp-carparts.com Pistons 13101-88480, there is an option for Mark ..
3
2017/02/07 15:10:30
sussdub

Gen 3 3sgte hesitation bogging issues

I am out of the blue having hesitation and bogging issues after a few days of heavy rain. The symptoms are very similar to http://www.mr2australia.c...lay/m/tm.aspx?m=125254 . It is a gen 3 swap running a gfb mbc, arc intercooler, ko racing intake and 3 inch catback exhaust. Everything has been r..
5
2017/02/07 06:11:58
Falcon

Info. Required. GEN 3. Cams.

Rebuilding Gen 3. Turbo engine.Inlet cam lobe height from heel to lobe tip mics up at 41.50 mm.My genuine Toyota printed workshop manual states that "Standard cam lobe height"Intake. 42.610 - 42.710 mm. with Minimum of 42.50 mm.I have measured 4 sets of cams now. Both Gen 2. and Gen 3. All mic up ab..
1
2017/02/06 21:53:12

<< ..16 17 18 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account