HELP - URGENT!!!!!

To Bottom

HELP - URGENT!!!!!
Post New Thread
Pinned
Admin

This forum will be turned off in the next 6 to 12 months

I will be turning off the server that runs this forum in the next 6 to 12 months. I run multiple discussion forums on it and since the introduction of Facebook Groups, usage of the forums has steadily decreased. The result of this is that revenue from Google ads no longer come close to covering the ..
5
2025/07/25 16:56:58
Regular
Loving Vanilla MR2 Owner

1990 SW20 - needs wiper motor and tacho

Hi all, My lovely "stock as a rock" 1990 SW20 has developed two electrical problems: 1) wiper intermittent setting she no work - auto electrician says needs replacement 'self park switch' or entire wiper motor (switch apparently is inside or part of motor assembly); and 2) tacho not working properly..

2025/10/13 14:44:56
PanV

Water by-pass pipe for a 3SGTE

G'dayI need a water by-pass pipe for a 3sgte turbo, if you have one or know where I can get it , please let me know.CheersPan..

2025/03/10 21:19:30
Admin

Gen3 3SGTE OEM injectors value?

Hey everyone, I will be selling a set of 4 OEM Gen3 3SGTE injectors soon and need to know their value. They were ultrasonically cleaned and flow tested around 2 years ago. New side feed injectors are available, though only junk Chinese ones. There are lots of bad stories about them. The guy that cl..
1
2025/02/18 15:12:37
RAY MR2

Clutch not working even though plenty of fluid in reservoir

What could be wrong? SW20 parked for several months, started it up but clutch not engaging. Checked fluid, all okay. Can't put it in and out of gear with engine running. Any help appreciated...
2
2024/02/26 17:54:24
crimyau

MR2 SW20 Gen5 ABS frunk line

Hi, I am in the process of installing a Gen5(1998-1999) ABS system into my Gen1 MR2. i have figured out the wiring and where half the brake lines connect to. I have attached a picture of where i think the lines are connected to. Is anybody able to confirm where the remaining 3 brake lines connect to..

2023/12/31 12:24:11
GTIRHil

Machine shop in ACT for 4AGE

HiI rebuilt my AW11 engine a couple of years back, getting the head redone at Belconnen. The engine still smokes so I ripped it out and want to get the bottom end done: bores, pistons, crank etc. The problem is that Belconnen is shut, and both Phillip and Queanbeyan have about four month waiting lis..

2022/11/24 15:02:54
harry1964

mr2 2000 soft top

any advice on replacing my soft top 2000 mr2 is there a hard top ?..
1
2022/11/12 05:21:49
RAY MR2

MR2 Wreckers Bendigo

Is Josh Burton away or in lockdown?I've been trying to contact him for several weeks to no avail. Does anyone know if he is okay?..
11
2022/08/06 02:34:58
watery

Mk3 2zz swap O2 sensors

Hey all, Im using a USDM 2000-2001 Celica ecu for my 2zz swap which requires one O2 sensor after the catalytic converter. As far as I know, our Spyders didn't have a downstream O2 sensor (atleast mine doesnt) so I won't be able to run an O2 sensor after the cat. My MWR header has two spots..

2022/02/15 18:13:59

1 2 3 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account