Electrical / Ignition / Fuel Injection

To Bottom

Electrical / Ignition / Fuel Injection (p.34)
Post New Thread
Regular
z250junker

Aw11 bogging down. 4ageu fml

Hey guys, I am new here. I own a aw11 with a 4ageu. Recently i have had bogging down between 3,800rpm and 5,500rpm. The car came with a standard Bigport with limited edition blown head gasket, this meant I replaced with a smallport (removing T-VIS) Drove for a few weeks and was infinately better..
11
2012/04/29 21:59:34
nightram

Pillar boost gauge

Quite a simple one. I need a dual gauge pillar mount. Who makes the best one for a sw20? **EDIT** This is what it looks like atm https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/470200_10150864150003033_747213032_12012390_56171410_o.jpg..
5
2012/04/27 18:48:48
gruntcake

3SGTE cold start timer switch resistance readings

My 1992 SW20 3SGTE has needed a bit too much cranking lately to get it started so I checked the resistance readings of the cold start timer sensor. When cold, my sensor is about 72 ohms from terminal STA to ground (the red/white wire that supplies +12V). This agrees with the BGB. STJ to STA reads a..
6
2012/04/23 21:05:40
mr_mi6

Quad Brake Light Mod for a Rev 3 ADM

I have a Rev 2 rear brake light loom, now how do I rewire my Rev 3 ADM to light up with 4 brake lights and 4 parkers? I'm sure many has done this mod. Been looking online and it seems to be only UK owners modding with rear fog lights which seems a bit different to my current situation...
3
2012/04/18 18:25:52
Rizo

MR2 Turbo OBD Port location and water temp gauge question

Hey guys, was wondering if a Gen 2 Mr2 has a factory OBD Port? Reason Im asking is that I want to get a Blitz Touch BRAIN installed in my car to monitor water Temp This is it here - http://www.blitz-uk.co.uk/Product-318.aspx OR Does anyone know of a digital gauge for water temp that doesnt requ..
8
2012/04/16 19:00:21
MRTurbo

Disabling T-VSV?

So I'm going to install an ATS MBC tonight and I'm wanting to know the easiest way to disable the T-VSV system. I've read different things such as plugging the vac hoses that go into the wastegate actuactor, or even just simply unplugging the connector from the T-VSV solenoid? Will this be effective..
3
2012/04/11 22:41:26
MRTurbo

Digital Boost gauges?

So I've been looking around for a decent boost gauge for a while, and was going to go for the Electronic Omori 45 mm like everyone else does, for the stock location. However, the thing I don't like about the Omori is that its not easily dimmable (I really cbf making a dimmer for it) and doesn't have..
11
2012/04/10 22:34:00
deano

ignition timing

I was just reading the bgb on how to adjust the ignition timing and it says that I need to connect the TE1 and E1 to put it into tunning mode. I have a PFC so does that mean I still need to do this? Thanks in advance...
1
2012/04/07 21:24:54
Bloke

Rear tailight assembly indicator globe

Gday all When using my right indicator it started clicking at twice normal speed which let me know I had a right indicator not working. I identified that it was the right rear and purchased a new globe. I found the following step by step which made it very easy. It may be a good guide if you have n..

2012/04/03 21:29:11

<< ..34 - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account