Electrical / Ignition / Fuel Injection

To Bottom

Electrical / Ignition / Fuel Injection (p.29)
Post New Thread
Regular
Gatesys SW20

Megasquirt?

So I've done a bit of reading I think I'm leaning more towards plug and play like the megasquirt I would like to get one being only minor bolt ons and a decent port and polished intake manifold I think it would be worth it engines running very well going to have a power run to see how we'll and w..
10
2013/01/07 14:32:14
Ant1

Tacho

My tacho isn't working, I have never even seen it move the slightest bit. Don't even get a reading on the Apexi AVC-R type-r.. Anyone got any idea?.. Done a search on here and the only thing I could find was the capacitors, could it be that even though I have no reading at all?..
23
2013/01/04 19:33:57
Firthy

Any recommendations for powerbulbs.com? UK reseller of lighting - very reasonable prices

Has anyone purchased from these guys? I'm looking at some Phillips Daylight running lamps for my daily and these list them at less than half the price from a retailer here and free shipping. http://www.powerbulbs.com/au/product/philips-daylight-4-daytime-running-lights-kit-drl Seems good but just wa..
6
2013/01/02 14:22:16
Sufz

AW11 Wiring Diagram

Hey guys.. Chasing a AW11 Dash wiring diagram for my brothers 87 AW11. We're looking to install a Viper alarm as someone tried to steal the car from our driveway. If someone could assist, that would be great. SuFz..
4
2013/01/02 13:37:51
Gatesys SW20

Na 1990 sdub injector o ring size?

Hey guys pulled my Injectors today from my rail when I took it off and replacing the o rings the packet I bought from repco for 55$ weren't the right size that he said they would fit even showed a sample looked fine but were a bit fat won't fit in the rail So guess ill take them back, and get some f..
5
2013/01/02 09:12:28
Gatesys SW20

How to remove fuel rail from gen 2 3sge

As title says how would I go about removing the fuel rail off my Mr2 easily with only using a hydraulic jack. Using a socket set and most tools also will Japanese fuel rail Bolt up correctly on my aus delivered 3sge?..
2
2012/12/29 22:38:48
Ant1

Apexi auto timer (Added photo)

So I took the alarm out from under the dash as its useless and one of the wires for the auto timer was attached to it. So I figured out where it went and it was working fine with the test wire, but then when I soldered and spliced the wire the auto timer will only stay on for one second before turni..
2
2012/12/10 20:18:55
Mrskylighter

Any electronics experts out there? I'm looking to have a simple circuit made.

Hi all, Is anyone on the board into electronics? As in building PCBs etc? In my AW11 I need to build a circuit which will fool the aircon amplifier into thinking that the aircon compressor is rotating. The AW11 supercharged body cars have rotation sensors fitted to the aircon pump and AW11 NA &..
4
2012/12/10 15:37:48
tassietiger1971

Rev Limiter-Best way to disable/remove

I have a 1995 SW20 3sge MR2, about to fit forged rods, high comp pistons, Kelford 272 IN, 264 EX cams, higher rate valve springs and have the lot including crank and flywheel all balanced. Will be doing some very minor head work as the original design has great flow/velocity as is. My question is wh..
5
2012/12/09 13:57:17
GTMR2

LED DASH LIGHTS

Hi There, One of my Christmas holiday projects for the MR2 is fitting LED dash lights in cool white. Can anyone recommend where to get them from and can anyone advise what the Low Fuel warning light would be in an LED Type? Cheers GTMR2..
1
2012/12/09 10:31:02

<< ..28 29 30 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account