Electrical / Ignition / Fuel Injection

To Bottom

Electrical / Ignition / Fuel Injection (p.24)
Post New Thread
Regular
seanay00

What fuel pump replacement to use for AW11 with 4AGZE?????

Well the in tank fuel pump on my AW11 is starting to seize due to the car sitting for about 5 years and only being started once a month. My question is what pump do i use as a replacement as i have the 4AGZE?? and how exactly do i do it?? Also do i need to run a larger pump or a surge tank with t..

2013/10/02 19:33:47
dj

Apexi Power FC

Can anyone let me know where to buy a Apexi Power FC for my SW20 gen 3 3SGTEI know new is near impossible but I'm also happy with used.Also is there anything out there that is just as good..
2
2013/09/29 23:42:46
triptek

Gen 3 3sgte injector plug position

I need a little help with my gen 3 3sgte JDM. I'm putting a factory loom back on and I need some help with the order of the injector plugs. There's 2 grey ones and 2 reds. I pretty sure they go in this order from the front of the engine. cylinder 1 = redcyl 2 = greycyl 3 = redcyl 4 = grey Can anyone..

2013/08/19 18:20:41
NEWtoMR2

Instrument Panel for a NA SW20 (Found answer)

I'm doing an auto to manual conversion on a 1990 SW20 NA. I'm trying to find out if there is a instrument panel for a manual that's not turbo as that's all I seem to find?Item Found Thanks Manny..

2013/08/15 22:06:21
darkstoria

MR2 Rev1 Power Fc help.

Hi guys, I have a Rev1 and am looking at ECU options. As it's a Rev1 I believe I can't use a PowerFC A.P engineering version as that was rev2 or so I read. I'm keen to get rid of that AFM and go a MAP sensor but just hard to find information on what to do with wiring or which ECU to ge..
10
2013/08/07 09:15:06
Fast Eddie

Wanting to buy

Stock 1990 3sgte turbo jdm fuel injectors in working order..
1
2013/08/06 12:30:14
zmit

Walbro dying?

Hey guys,Haven't posted here for a while, but you get that. I've had a Walbro pump in my gen 2 3SGTE for about 3 years now (April 2010). Over the last few weeks i've been hearing a bit of a whine coming from the front (ish) of the car. I thought it might have been the power steering.There have been ..
1
2013/07/31 18:18:00
worldwalker

4AGZE ECU issues but no fault codes.

Reposting from Toyomods to better my chances of fixing this! Hi guys, I'm trying to suss out an idle and hesitation/load issue with my 4AGZE. I figured I'd start with a search and have looked at all the obvious. The idle problem is the "common" issue: Ticks over fine (first time every time), r..
33
2013/07/31 07:30:04
Monika

Replacing instrument panel bulbs

Hi all, How hard is it to replace the instrument panel bulbs? After 19 years of use they are getting very dim. Please tell me that there is an easy way without having to remove the whole dash. Also, does anyone know the correct code for replacement LED bulbs for the instrument panel? ..
6
2013/07/27 14:46:53
Monika

[Subject Change] Dual filament tail/brake lights not working

Hi, OK, so had my "TRC" query answered - thank you Dylmrt. Moving on to the second question: My rear tail/brake sockets are currently configured to be single filament globes for inner brake lights only and dual filament globes for the outer tail/brake lights............however, the outer br..
16
2013/07/25 09:12:58

<< ..22 23 24 .. - Powered by APG vNext Trial

© 2026 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account