Electrical / Ignition / Fuel Injection

To Bottom

Electrical / Ignition / Fuel Injection (p.13)
Post New Thread
Regular
Trevwood

Immobiliser bypass

I have a 1990 sw20 and the immobiliser on the dash decided not to work (for about 5 minutes) the other day, is there a way of bypassing it and just installing a switch or button?..
8
2015/10/07 20:25:10
accident94

Fitting a MSPNP to a JDM AW11.

So, i see no reason why a mspnp designed for a usdm MAF 4age can't be fitted to a JDM aw11 if you repin the connectors. To test this theory i intend to make an adapter loom from a defunct ecu and about 8 inches of engine loom from the connector back. My research, tracing wiring diagrams and compari..
1
2015/09/25 09:42:00
Tempaccount

Fuel gauge always on?

Is this normal, just seems a bit odd Sent from my Moto G using Tapatalk..
6
2015/09/22 16:12:58
tiff_lee

DIY Projector lens retrofit into H6054/7x6/MR2 headlight housing

This may be of interest to some on here, my DIY projector retrofit. As i'm sure some of you are aware the standard headlight output from an MR2 is pretty pants, of course you can buy expensive philips bulbs, osram nightbreakers etc but nothing compares to the light output from a 'Projector' headligh..
11
2015/09/01 00:50:50
Steve_A

4 port boost solenoid with Power FC?

Has anyone used a 4 port for boost control and run it with the Power FC? I'm looking to run one so I can use the smallest wastegate spring possible and still hold 20-25psi...
1
2015/07/31 00:39:22
White hotshot

After market Engine Management System

Hi I am looking at having an after market ECU installed in my 98 FI SW20. Can anyone recommend a good cost effective product? The modifications on the car are as follows, exhaust, pod filter, manual boost controller, blow off valve, fuel pump, and possibly turbo, all done by previous owner. Not sure..
8
2015/07/28 09:08:03
davidp_mr2

Fuel pressure regulator

Hey guys any one got a spare working fuel pressure reg of a NA 3sge Gen 2? And you want to sell it;) Bogging down when under load could the fuel pressure reg do this? Then revs ok bogging usually from 2-4.5k. Thanks, David..

2015/07/21 19:45:19
Sweet Chilli Philly

Foglight problems :(

Hey guys, Trying to get around to fixing another problem with my 2. Plain and simple, my foglights don't work. I'm not really sure what is wrong, I removed the foglights and inspected the globes and they look alright, the fuse is there and I temporarily replaced it with another fuse and still noth..
4
2015/07/20 20:30:25
Guest

Tacho/rpm needle jumps 1500rpm & boost gauge needle at high, key at on

Any ideas why - the key at the on position, the rpm jumps up to 1500 (the car has not started), and the boost gauge (factory) lifts as high as it can. Start the car and the rpm responds to throttle but it sites 1500 rpm higher than what it should. I have a AVCR and it is reading the correct rpm, how..
6
2015/07/05 14:21:11
BLKLTD

Haltech Racepak Speedometer AW11

First time poster here :) I'm finally getting my AW11 back on the road after 16 months, pretty excited! We've installed a Racepak iQ3 Display dash, but I've run into a snag with getting the speedometer working.. My mechanic tells me I need a speed rectification sensor, Cable to Pulse. I'm wondering ..
5
2015/06/23 23:13:10

<< ..13 14 15 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account